7 files changed, 0 insertions, 341 deletions
diff --git a/other/modprobe/hid_apple.conf b/other/modprobe/hid_apple.conf
deleted file mode 100644
index 25c96dc..0000000
--- a/other/modprobe/hid_apple.conf
+++ /dev/null
@@ -1 +0,0 @@
-options hid_apple iso_layout=0
diff --git a/other/modprobe/snd_hda_intel.conf b/other/modprobe/snd_hda_intel.conf
deleted file mode 100644
index 8bf2a4f..0000000
--- a/other/modprobe/snd_hda_intel.conf
+++ /dev/null
@@ -1 +0,0 @@
-options snd_hda_intel power_save=1
diff --git a/other/modprobe/usbcore.conf b/other/modprobe/usbcore.conf
deleted file mode 100644
index db61794..0000000
--- a/other/modprobe/usbcore.conf
+++ /dev/null
@@ -1 +0,0 @@
-options usbcore autosuspend=1
diff --git a/other/systemd/mba6x-backlight.service b/other/systemd/mba6x-backlight.service
deleted file mode 100644
index 8fbfde1..0000000
--- a/other/systemd/mba6x-backlight.service
+++ /dev/null
@@ -1,18 +0,0 @@
-# copy to /etc/systemd/system/ (at least on Arch Linux)
-
-[Unit]
-Description=Load/Save Screen Backlight Brightness of backlight:mba6x_backlight
-DefaultDependencies=no
-RequiresMountsFor=/var/lib/systemd/backlight
-Conflicts=shutdown.target
-After=systemd-remount-fs.service
-Before=sysinit.target shutdown.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-ExecStart=/usr/lib/systemd/systemd-backlight load backlight:mba6x_backlight
-ExecStop=/usr/lib/systemd/systemd-backlight save backlight:mba6x_backlight
-
-[Install]
-WantedBy=multi-user.target
diff --git a/other/systemd/powertop.service b/other/systemd/powertop.service
deleted file mode 100644
index d1d41cb..0000000
--- a/other/systemd/powertop.service
+++ /dev/null
@@ -1,11 +0,0 @@
-# /etc/systemd/system/powertop.service
-
-[Unit]
-Description=Powertop tunings
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/powertop --auto-tune
-
-[Install]
-WantedBy=multi-user.target
-\ No newline at end of file
diff --git a/other/systemd/suppress-gpe-66-4e.service b/other/systemd/suppress-gpe-66-4e.service
deleted file mode 100644
index 2d44f14..0000000
--- a/other/systemd/suppress-gpe-66-4e.service
+++ /dev/null
@@ -1,11 +0,0 @@
-# copy to /etc/systemd/system/ (at least on Arch Linux)
-
-[Unit]
-Description=KernGPE66
-
-[Service]
-ExecStart=/bin/sh -c "echo disable > /sys/firmware/acpi/interrupts/gpe66 && echo disable > /sys/firmware/acpi/interrupts/gpe4E"
-Type=oneshot
-
-[Install]
-WantedBy=multi-user.target
diff --git a/other/tlp/etc/default/tlp b/other/tlp/etc/default/tlp
deleted file mode 100644
index 9b411e3..0000000
--- a/other/tlp/etc/default/tlp
+++ /dev/null
@@ -1,298 +0,0 @@
-# ------------------------------------------------------------------------------
-# tlp - Parameters for power saving
-# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
-
-# Hint: some features are disabled by default, remove the leading # to enable
-# them.
-
-# Set to 0 to disable, 1 to enable TLP.
-TLP_ENABLE=1
-
-# Operation mode when no power supply can be detected: AC, BAT
-# Concerns some desktop and embedded hardware only.
-TLP_DEFAULT_MODE=AC
-
-# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
-# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC
-TLP_PERSISTENT_DEFAULT=0
-
-# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
-# Non-zero value enables, zero disables laptop mode.
-DISK_IDLE_SECS_ON_AC=0
-DISK_IDLE_SECS_ON_BAT=2
-
-# Dirty page values (timeouts in secs).
-MAX_LOST_WORK_SECS_ON_AC=15
-MAX_LOST_WORK_SECS_ON_BAT=60
-
-# Hint: CPU parameters below are disabled by default, remove the leading #
-# to enable them, otherwise kernel default values are used.
-
-# Select a CPU frequency scaling governor.
-# Intel Core i processor with intel_pstate driver:
-#   powersave(*), performance
-# Older hardware with acpi-cpufreq driver:
-#   ondemand(*), powersave, performance, conservative
-# (*) is recommended.
-# Hint: use tlp-stat -p to show the active driver and available governors.
-# Important:
-#   You *must* disable your distribution's governor settings or conflicts will
-#   occur. ondemand is sufficient for *almost all* workloads, you should know
-#   what you're doing!
-CPU_SCALING_GOVERNOR_ON_AC=performance
-CPU_SCALING_GOVERNOR_ON_BAT=powersave
-
-# Set the min/max frequency available for the scaling governor.
-# Possible values strongly depend on your CPU. For available frequencies see
-# the output of tlp-stat -p.
-CPU_SCALING_MIN_FREQ_ON_AC=800000
-CPU_SCALING_MAX_FREQ_ON_AC=3300000
-CPU_SCALING_MIN_FREQ_ON_BAT=800000
-CPU_SCALING_MAX_FREQ_ON_BAT=3300000
-
-# Set energy performance hints (HWP) for Intel P-state governor:
-#   default, performance, balance_performance, balance_power, power
-# Values are given in order of increasing power saving.
-# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
-CPU_HWP_ON_AC=balance_performance
-CPU_HWP_ON_BAT=balance_power
-
-# Set Intel P-state performance: 0..100 (%)
-# Limit the max/min P-state to control the power dissipation of the CPU.
-# Values are stated as a percentage of the available performance.
-# Requires an Intel Core i processor with intel_pstate driver.
-CPU_MIN_PERF_ON_AC=0
-CPU_MAX_PERF_ON_AC=100
-CPU_MIN_PERF_ON_BAT=0
-CPU_MAX_PERF_ON_BAT=100
-
-# Set the CPU "turbo boost" feature: 0=disable, 1=allow
-# Requires an Intel Core i processor.
-# Important:
-# - This may conflict with your distribution's governor settings
-# - A value of 1 does *not* activate boosting, it just allows it
-CPU_BOOST_ON_AC=1
-CPU_BOOST_ON_BAT=1
-
-# Minimize number of used CPU cores/hyper-threads under light load conditions
-SCHED_POWERSAVE_ON_AC=0
-SCHED_POWERSAVE_ON_BAT=1
-
-# Kernel NMI Watchdog:
-#   0=disable (default, saves power), 1=enable (for kernel debugging only)
-NMI_WATCHDOG=0
-
-# Change CPU voltages aka "undervolting" - Kernel with PHC patch required
-# Frequency voltage pairs are written to:
-#   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
-# CAUTION: only use this, if you thoroughly understand what you are doing!
-#PHC_CONTROLS="F:V F:V F:V F:V"
-
-# Set CPU performance versus energy savings policy:
-#   performance, normal, powersave
-# Requires kernel module msr and x86_energy_perf_policy from linux-tools
-ENERGY_PERF_POLICY_ON_AC=performance
-ENERGY_PERF_POLICY_ON_BAT=powersave
-
-# Hard disk devices; separate multiple devices with spaces (default: sda).
-# Devices can be specified by disk ID also (lookup with: tlp diskid).
-DISK_DEVICES="sda"
-
-# Hard disk advanced power management level: 1..254, 255 (max saving, min, off)
-# Levels 1..127 may spin down the disk; 255 allowable on most drives.
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the hardware default for the particular disk.
-DISK_APM_LEVEL_ON_AC="254"
-DISK_APM_LEVEL_ON_BAT="128"
-
-# Hard disk spin down timeout:
-#   0:        spin down disabled
-#   1..240:   timeouts from 5s to 20min (in units of 5s)
-#   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
-# See 'man hdparm' for details.
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the hardware default for the particular disk.
-#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
-#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
-
-# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq);
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the kernel default scheduler for the particular disk.
-#DISK_IOSCHED="cfq cfq"
-
-# SATA aggressive link power management (ALPM):
-#   min_power, medium_power, max_performance
-#SATA_LINKPWR_ON_AC=max_performance
-#SATA_LINKPWR_ON_BAT=min_power
-
-# Exclude SATA host devices from link power management.
-# Separate multiple hosts with spaces.
-#SATA_LINKPWR_BLACKLIST="host1"
-
-# Runtime Power Management for AHCI controllers and disks:
-#   on=disable, auto=enable
-# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss
-#AHCI_RUNTIME_PM_ON_AC=on
-#AHCI_RUNTIME_PM_ON_BAT=on
-
-# Seconds of inactivity before disk is suspended
-AHCI_RUNTIME_PM_TIMEOUT=15
-
-# PCI Express Active State Power Management (PCIe ASPM):
-#   default, performance, powersave
-PCIE_ASPM_ON_AC=performance
-PCIE_ASPM_ON_BAT=powersave
-
-# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
-# auto = mid on BAT, high on AC; default = use hardware defaults.
-# (Kernel >= 2.6.35 only, open-source radeon driver explicitly)
-#RADEON_POWER_PROFILE_ON_AC=high
-#RADEON_POWER_PROFILE_ON_BAT=low
-
-# Radeon dynamic power management method (DPM): battery, performance
-# (Kernel >= 3.11 only, requires boot option radeon.dpm=1)
-#RADEON_DPM_STATE_ON_AC=performance
-#RADEON_DPM_STATE_ON_BAT=battery
-
-# Radeon DPM performance level: auto, low, high; auto is recommended.
-#RADEON_DPM_PERF_LEVEL_ON_AC=auto
-#RADEON_DPM_PERF_LEVEL_ON_BAT=auto
-
-# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
-WIFI_PWR_ON_AC=off
-WIFI_PWR_ON_BAT=on
-
-# Disable wake on LAN: Y/N
-WOL_DISABLE=Y
-
-# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
-# A value of 0 disables, >=1 enables power saving.
-SOUND_POWER_SAVE_ON_AC=0
-SOUND_POWER_SAVE_ON_BAT=1
-
-# Disable controller too (HDA only): Y/N
-SOUND_POWER_SAVE_CONTROLLER=N
-
-# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
-# Drive can be powered on again by releasing (and reinserting) the eject lever
-# or by pressing the disc eject button on newer models.
-# Note: an UltraBay/MediaBay hard disk is never powered off.
-#BAY_POWEROFF_ON_AC=0
-#BAY_POWEROFF_ON_BAT=0
-# Optical drive device to power off (default sr0).
-#BAY_DEVICE="sr0"
-
-# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable
-RUNTIME_PM_ON_AC=on
-RUNTIME_PM_ON_BAT=auto
-
-# Exclude PCI(e) device adresses the following list from Runtime PM
-# (separate with spaces). Use lspci to get the adresses (1st column).
-#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
-
-# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
-# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
-# prevents accidential power-on of dGPU in hybrid graphics setups.
-# Use "" to disable the feature completely.
-# Separate multiple drivers with spaces.
-#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
-
-# Set to 0 to disable, 1 to enable USB autosuspend feature.
-USB_AUTOSUSPEND=1
-
-# Exclude listed devices from USB autosuspend (separate with spaces).
-# Use lsusb to get the ids.
-# Note: input devices (usbhid) are excluded automatically
-#USB_BLACKLIST="1111:2222 3333:4444"
-
-# Bluetooth devices are excluded from USB autosuspend:
-#   0=do not exclude, 1=exclude
-USB_BLACKLIST_BTUSB=0
-
-# Phone devices are excluded from USB autosuspend:
-#   0=do not exclude, 1=exclude (enable charging)
-USB_BLACKLIST_PHONE=0
-
-# WWAN devices are excluded from USB autosuspend:
-#   0=do not exclude, 1=exclude
-USB_BLACKLIST_WWAN=1
-
-# Include listed devices into USB autosuspend even if already excluded
-# by the blacklists above (separate with spaces).
-# Use lsusb to get the ids.
-#USB_WHITELIST="1111:2222 3333:4444"
-
-# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
-# (workaround for USB devices that cause shutdown problems).
-#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
-
-# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
-# on system startup: 0=disable, 1=enable.
-# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
-#   are ignored when this is enabled!
-RESTORE_DEVICE_STATE_ON_STARTUP=0
-
-# Radio devices to disable on startup: bluetooth, wifi, wwan.
-# Separate multiple devices with spaces.
-#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
-
-# Radio devices to enable on startup: bluetooth, wifi, wwan.
-# Separate multiple devices with spaces.
-#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
-
-# Radio devices to disable on shutdown: bluetooth, wifi, wwan
-# (workaround for devices that are blocking shutdown).
-#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
-
-# Radio devices to enable on shutdown: bluetooth, wifi, wwan
-# (to prevent other operating systems from missing radios).
-#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
-
-# Radio devices to enable on AC: bluetooth, wifi, wwan
-#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
-
-# Radio devices to disable on battery: bluetooth, wifi, wwan
-#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
-
-# Radio devices to disable on battery when not in use (not connected):
-# bluetooth, wifi, wwan
-#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
-
-# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
-# required). Charging starts when the remaining capacity falls below the
-# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
-# Main / Internal battery (values in %)
-#START_CHARGE_THRESH_BAT0=75
-#STOP_CHARGE_THRESH_BAT0=80
-# Ultrabay / Slice / Replaceable battery (values in %)
-#START_CHARGE_THRESH_BAT1=75
-#STOP_CHARGE_THRESH_BAT1=80
-
-# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable
-#RESTORE_THRESHOLDS_ON_BAT=1
-
-# ------------------------------------------------------------------------------
-# tlp-rdw - Parameters for the radio device wizard
-# Possible devices: bluetooth, wifi, wwan
-
-# Hints:
-# - Parameters are disabled by default, remove the leading # to enable them.
-# - Separate multiple radio devices with spaces.
-
-# Radio devices to disable on connect.
-#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
-#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
-#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
-
-# Radio devices to enable on disconnect.
-#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
-#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
-#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
-
-# Radio devices to enable/disable when docked.
-#DEVICES_TO_ENABLE_ON_DOCK=""
-#DEVICES_TO_DISABLE_ON_DOCK=""
-
-# Radio devices to enable/disable when undocked.
-#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
-#DEVICES_TO_DISABLE_ON_UNDOCK=""