diff options
Diffstat (limited to 'ncmpcpp/.ncmpcpp')
| -rw-r--r-- | ncmpcpp/.ncmpcpp/bindings | 536 | ||||
| -rw-r--r-- | ncmpcpp/.ncmpcpp/config | 581 |
2 files changed, 557 insertions, 560 deletions
diff --git a/ncmpcpp/.ncmpcpp/bindings b/ncmpcpp/.ncmpcpp/bindings index c41b932..e09ac96 100644 --- a/ncmpcpp/.ncmpcpp/bindings +++ b/ncmpcpp/.ncmpcpp/bindings @@ -1,513 +1,27 @@ -########################################################## -## this is example bindings configuration file, copy it ## -## to ~/.ncmpcpp/bindings and set up your preferences ## -########################################################## -## -##### General rules ##### -## -## 1) Because each action has runtime checks whether it's -## ok to run it, a few actions can be bound to one key. -## Actions will be bound in order given in configuration -## file. When a key is pressed, first action in order -## will test itself whether it's possible to run it. If -## test succeeds, action is executed and other actions -## bound to this key are ignored. If it doesn't, next -## action in order tests itself etc. -## -## 2) It's possible to bind more that one action at once -## to a key. It can be done using the following syntax: -## -## def_key "key" -## action1 -## action2 -## ... -## -## This creates a chain of actions. When such chain is -## executed, each action in chain is run until the end of -## chain is reached or one of its actions fails to execute -## due to its requirements not being met. If multiple actions -## and/or chains are bound to the same key, they will be -## consecutively run until one of them gets fully executed. -## -## 3) When ncmpcpp starts, bindings configuration file is -## parsed and then ncmpcpp provides "missing pieces" -## of default keybindings. If you want to disable some -## bindings, there is a special action called 'dummy' -## for that purpose. Eg. if you want to disable ability -## to crop playlists, you need to put the following -## into configuration file: -## -## def_key "C" -## dummy -## -## After that ncmpcpp will not bind any default action -## to this key. -## -## 4) To let you write simple macros, the following special -## actions are provided: -## -## - push_character "character" - pushes given special -## character into input queue, so it will be immediately -## picked by ncmpcpp upon next call to readKey function. -## Accepted values: mouse, up, down, page_up, page_down, -## home, end, space, enter, insert, delete, left, right, -## tab, shift_tab, ctrl_a, ctrl_b, ..., ctrl_z, f1, f2, -## ..., f12, backspace, backspace_2. -## -## - push_characters "string" - pushes given string into -## input queue. -## -## - require_runnable "action" - checks whether given action -## is runnable and fails if it isn't. This is especially -## useful when mixed with previous two functions. Consider -## the following macro definition: -## -## def_key "key" -## push_characters "custom_filter" -## apply_filter -## -## If apply_filter can't be currently run, we end up with -## sequence of characters in input queue which will be -## treated just as we typed them. This may lead to unexpected -## results (in this case 'c' will most likely clear current -## playlist, 'u' will trigger database update, 's' will stop -## playback etc.). To prevent such thing from happening, we -## need to change above definition to this one: -## -## def_key "key" -## require_runnable "apply_filter" -## push_characters "custom_filter" -## apply_filter -## -## Here, first we test whether apply_filter can be actually run -## before we stuff characters into input queue, so if condition -## is not met, whole chain is aborted and we're fine. -## -## - require_screen "screen" - checks whether given screen is -## currently active. accepted values: browser, clock, help, -## media_library, outputs, playlist, playlist_editor, -## search_engine, tag_editor, visualizer, last_fm, lyrics, -## selected_items_adder, server_info, song_info, -## sort_playlist_dialog, tiny_tag_editor. -## -## - run_external_command "command" - runs given command using -## system() function. -## -## 5) In addition to binding to a key, you can also bind actions -## or chains of actions to a command. If it comes to commands, -## syntax is very similar to defining keys. Here goes example -## definition of a command: -## -## def_command "quit" [deferred] -## stop -## quit -## -## If you execute the above command (which can be done by -## invoking action execute_command, typing 'quit' and pressing -## enter), ncmpcpp will stop the player and then quit. Note the -## presence of word 'deferred' enclosed in square brackets. It -## tells ncmpcpp to wait for confirmation (ie. pressing enter) -## after you typed quit. Instead of 'deferred', 'immediate' -## could be used. Then ncmpcpp will not wait for confirmation -## (enter) and will execute the command the moment it sees it. -## -## Note: Both 'backspace' and 'backspace_2' are used because some -## terminals interpret backspace using keycode of 'backspace' -## and some the one of 'backspace_2'. You can get away with -## binding once if all your terminal emulators use the same -## value. -## -## Note: There is a difference between: -## -## def_key "key" -## action1 -## -## def_key "key" -## action2 -## -## and -## -## def_key "key" -## action1 -## action2 -## -## First one binds two single actions to the same key whilst -## second one defines a chain of actions. The behavior of -## these two is different and is described in (1) and (2). -## -## Note: Function def_key accepts non-ascii characters. -## -##### List of unbound actions ##### -## -## The following actions are not bound to any key/command: -## -## - set_volume -## - filter_playlist_on_priorities -## -# -#def_key "mouse" -# mouse_event -# -def_key "k" - scroll_up -# def_key "j" - scroll_down -# -#def_key "[" -# scroll_up_album -# -#def_key "]" -# scroll_down_album -# -#def_key "{" -# scroll_up_artist -# -#def_key "}" -# scroll_down_artist -# -#def_key "page_up" -# page_up -# -#def_key "page_down" -# page_down -# -def_key "g" - move_home -# -def_key "G" - move_end -# -#def_key "space" -# press_space -# -#def_key "enter" -# press_enter -# -#def_key "delete" -# delete_playlist_items -# -#def_key "delete" -# delete_stored_playlist -# -def_key "l" - next_column -# -#def_key "right" -# slave_screen -# -#def_key "right" -# volume_up -# -#def_key "+" -# volume_up -# + scroll_down +def_key "k" + scroll_up + +def_key "ctrl-u" + page_up +def_key "ctrl-d" + page_down + def_key "h" - previous_column -# -#def_key "left" -# master_screen -# -#def_key "left" -# volume_down -# -#def_key "-" -# volume_down -# -def_key ";" - execute_command -# -#def_key "tab" -# next_screen -# -#def_key "shift_tab" -# previous_screen -# -#def_key "f1" -# show_help -# -#def_key "1" -# show_playlist -# -#def_key "2" -# show_browser -# -#def_key "2" -# change_browse_mode -# -#def_key "3" -# show_search_engine -# -#def_key "3" -# reset_search_engine -# -#def_key "4" -# show_media_library -# -#def_key "4" -# toggle_media_library_columns_mode -# -#def_key "5" -# show_playlist_editor -# -#def_key "6" -# show_tag_editor -# -#def_key "7" -# show_outputs -# -#def_key "8" -# show_visualizer -# -#def_key "=" -# show_clock -# -#def_key "@" -# show_server_info -# -#def_key "s" -# stop -# -#def_key "p" -# pause -# -#def_key ">" -# next -# -#def_key "<" -# previous -# -#def_key "ctrl_h" -# jump_to_parent_directory -# -#def_key "ctrl_h" -# replay_song -# -#def_key "backspace" -# jump_to_parent_directory -# -#def_key "backspace" -# replay_song -# -#def_key "backspace_2" -# jump_to_parent_directory -# -#def_key "backspace_2" -# replay_song -# -#def_key "f" -# seek_forward -# -#def_key "b" -# seek_backward -# -#def_key "r" -# toggle_repeat -# -#def_key "z" -# toggle_random -# -#def_key "y" -# save_tag_changes -# -#def_key "y" -# start_searching -# -#def_key "y" -# toggle_single -# -#def_key "R" -# toggle_consume -# -#def_key "Y" -# toggle_replay_gain_mode -# -#def_key "t" -# toggle_space_mode -# -#def_key "T" -# toggle_add_mode -# -#def_key "|" -# toggle_mouse -# -#def_key "#" -# toggle_bitrate_visibility -# -#def_key "Z" -# shuffle -# -#def_key "x" -# toggle_crossfade -# -#def_key "X" -# set_crossfade -# -#def_key "u" -# update_database -# -#def_key "ctrl_v" -# sort_playlist -# -#def_key "ctrl_r" -# reverse_playlist -# -#def_key "ctrl_f" -# apply_filter -# -#def_key "/" -# find -# -#def_key "/" -# find_item_forward -# -#def_key "?" -# find -# -#def_key "?" -# find_item_backward -# -#def_key "." -# next_found_item -# -#def_key "," -# previous_found_item -# -#def_key "w" -# toggle_find_mode -# -#def_key "e" -# edit_song -# -#def_key "e" -# edit_library_tag -# -#def_key "e" -# edit_library_album -# -#def_key "e" -# edit_directory_name -# -#def_key "e" -# edit_playlist_name -# -#def_key "e" -# edit_lyrics -# -#def_key "i" -# show_song_info -# -#def_key "I" -# show_artist_info -# -#def_key "g" -# jump_to_position_in_song -# -def_key "ctrl-l" - show_lyrics -# -#def_key "v" -# reverse_selection -# -#def_key "V" -# remove_selection -# -#def_key "B" -# select_album -# -#def_key "a" -# add_selected_items -# -#def_key "c" -# clear_playlist -# -#def_key "c" -# clear_main_playlist -# -#def_key "C" -# crop_playlist -# -#def_key "C" -# crop_main_playlist -# -#def_key "m" -# move_sort_order_up -# -#def_key "m" -# move_selected_items_up -# -#def_key "m" -# toggle_media_library_sort_mode -# -#def_key "m" -# set_visualizer_sample_multiplier -# -#def_key "n" -# move_sort_order_down -# -#def_key "n" -# move_selected_items_down -# -#def_key "M" -# move_selected_items_to -# -#def_key "A" -# add -# -#def_key "S" -# save_playlist -# -#def_key "o" -# jump_to_playing_song -# -#def_key "G" -# jump_to_browser -# -#def_key "G" -# jump_to_playlist_editor -# -#def_key "~" -# jump_to_media_library -# -#def_key "E" -# jump_to_tag_editor -# -#def_key "U" -# toggle_playing_song_centering -# -#def_key "P" -# toggle_display_mode -# -#def_key "\\" -# toggle_interface -# -#def_key "!" -# toggle_separators_between_albums -# -#def_key "L" -# toggle_lyrics_fetcher -# -#def_key "F" -# toggle_fetching_lyrics_in_background -# -#def_key "ctrl_l" -# toggle_screen_lock -# -#def_key "`" -# toggle_browser_sort_mode -# -#def_key "`" -# toggle_library_tag_type -# -#def_key "`" -# refetch_lyrics -# -#def_key "`" -# add_random_items -# -#def_key "ctrl_p" -# set_selected_items_priority -# -#def_key "q" -# quit -# + previous_column +def_key "l" + next_column + +def_key "." + show_lyrics + +def_key "n" + next_found_item +def_key "N" + previous_found_item + +def_key "J" + move_sort_order_down +def_key "K" + move_sort_order_up diff --git a/ncmpcpp/.ncmpcpp/config b/ncmpcpp/.ncmpcpp/config index eed61d7..75ca4c9 100644 --- a/ncmpcpp/.ncmpcpp/config +++ b/ncmpcpp/.ncmpcpp/config @@ -1,49 +1,532 @@ -mpd_music_dir = "~/music" -mpd_connection_timeout = "5" -mpd_crossfade_time = "5" -playlist_disable_highlight_delay = "0" -playlist_display_mode = "columns" -browser_display_mode = "columns" -incremental_seeking = "yes" -follow_now_playing_lyrics = "yes" -ignore_leading_the = "yes" -song_columns_list_format = "(10)[blue]{l} (30)[green]{a} (30)[magenta]{b} (50)[yellow]{t}" -main_window_color = "white" -header_window_color = "cyan" -volume_color = "red" -progressbar_color = black -progressbar_elapsed_color = cyan -color1 = "cyan" -color2 = "cyan" -active_column_color = "cyan" -active_window_border = "blue" - -visualizer_fifo_path = "/tmp/mpd.fifo" -visualizer_output_name = "my_fifo" -visualizer_sync_interval = "30" -visualizer_in_stereo = "yes" -#visualizer_type = "wave" (spectrum/wave) -visualizer_type = "spectrum" (spectrum/wave) - -song_list_format = "{$7%a $1• $6}{%t}" -song_status_format = "$7%a $1• $6%t $1• $2%b$1" -statusbar_color = "black" -visualizer_color = "red" -main_window_highlight_color = "red" -header_visibility = "no" -statusbar_visibility = "yes" -colors_enabled = "yes" -now_playing_prefix = "-> " -now_playing_suffix = " " -autocenter_mode = "yes" -centered_cursor = "yes" -progressbar_look = "───" -progressbar_boldness = yes -titles_visibility = "no" -mouse_support = "no" -discard_colors_if_item_is_selected = "yes" - -user_interface = "alternative" -alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b -alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D} - +############################################################## +## This is the example configuration file. Copy it to ## +## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ## +## and set up your preferences. ## +############################################################## +# +##### directories ###### +## +## Directory for storing ncmpcpp related files. +## Changing it is useful if you want to store +## everything somewhere else and provide command +## line setting for alternative location to config +## file which defines that while launching ncmpcpp. +## +# +ncmpcpp_directory = ~/.ncmpcpp +# +## +## Directory for storing downloaded lyrics. It +## defaults to ~/.lyrics since other MPD clients +## (eg. ncmpc) also use that location. +## +# +#lyrics_directory = ~/.lyrics +# +##### connection settings ##### +# +#mpd_host = localhost +# +#mpd_port = 6600 +# +#mpd_connection_timeout = 5 +# +## Needed for tag editor and file operations to work. +## +mpd_music_dir = ~/usr/music +# +#mpd_crossfade_time = 5 +# +##### music visualizer ##### +## +## Note: In order to make music visualizer work you'll +## need to use mpd fifo output, whose format parameter +## has to be set to 44100:16:1 for mono visualization +## or 44100:16:2 for stereo visualization. Example +## configuration (it has to be put into mpd.conf): +## +## audio_output { +## type "fifo" +## name "Visualizer feed" +## path "/tmp/mpd.fifo" +## format "44100:16:2" +## } +## +# +visualizer_fifo_path = /tmp/mpd.fifo +# +## +## Note: Below parameter is needed for ncmpcpp +## to determine which output provides data for +## visualizer and thus allow syncing between +## visualization and sound as currently there +## are some problems with it. +## +# +visualizer_output_name = my fifo +# +## +## If you set format to 44100:16:2, make it 'yes'. +## +visualizer_in_stereo = yes +# +## +## Multiply received samples by given value. Very +## useful for proper visualization of quiet music. +## +#visualizer_sample_multiplier = 1 +# +## +## Note: Below parameter defines how often ncmpcpp +## has to "synchronize" visualizer and audio outputs. +## 30 seconds is optimal value, but if you experience +## synchronization problems, set it to lower value. +## Keep in mind that sane values start with >=10. +## +# +visualizer_sync_interval = 30 +# +## +## Note: To enable spectrum frequency visualization +## you need to compile ncmpcpp with fftw3 support. +## +# +## Available values: spectrum, wave, wave_filled, ellipse. +## +visualizer_type = spectrum +# +#visualizer_look = ●▮ +visualizer_look = "●•" +# +#visualizer_color = blue, cyan, green, yellow, magenta, red +# +## Alternative subset of 256 colors for terminals that support it. +## +#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161 +# +##### system encoding ##### +## +## ncmpcpp should detect your charset encoding +## but if it failed to do so, you can specify +## charset encoding you are using here. +## +## Note: You can see whether your ncmpcpp build +## supports charset detection by checking output +## of `ncmpcpp --version`. +## +## Note: Since MPD uses UTF-8 by default, setting +## this option makes sense only if your encoding +## is different. +## +# +#system_encoding = "" +# +##### delays ##### +# +## Time of inactivity (in seconds) after playlist +## highlighting will be disabled (0 = always on). +## +#playlist_disable_highlight_delay = 5 +# +## Defines how long messages are supposed to be visible. +## +#message_delay_time = 5 +# +##### song format ##### +## +## For a song format you can use: +## +## %l - length +## %f - filename +## %D - directory +## %a - artist +## %A - album artist +## %t - title +## %b - album +## %y - date +## %n - track number (01/12 -> 01) +## %N - full track info (01/12 -> 01/12) +## %g - genre +## %c - composer +## %p - performer +## %d - disc +## %C - comment +## %P - priority +## $R - begin right alignment +## +## If you want to make sure that a part of the format is displayed +## only when certain tags are present, you can archieve it by +## grouping them with brackets, e.g. '{%a - %t}' will be evaluated +## to 'ARTIST - TITLE' if both tags are present or '' otherwise. +## It is also possible to define a list of alternatives by providing +## several groups and separating them with '|', e.g. '{%t}|{%f}' +## will be evaluated to 'TITLE' or 'FILENAME' if the former is not +## present. +## +## Note: If you want to set limit on maximal length of a tag, just +## put the appropriate number between % and character that defines +## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'. +## +## In addition, formats support markers used for text attributes. +## They are followed by character '$'. After that you can put: +## +## - 0 - default window color (discards all other colors) +## - 1 - black +## - 2 - red +## - 3 - green +## - 4 - yellow +## - 5 - blue +## - 6 - magenta +## - 7 - cyan +## - 8 - white +## - 9 - end of current color +## - b - bold text +## - u - underline text +## - r - reverse colors +## - a - use alternative character set +## +## If you don't want to use a non-color attribute anymore, just put it +## again, but this time insert character '/' between '$' and attribute +## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag +## or filename with reversed colors. +## +## If you want to use 256 colors and/or background colors in formats +## (the naming scheme is described below in section about color +## definitions), it can be done with the syntax $(COLOR), e.g. to set +## the artist tag to one of the non-standard colors and make it have +## yellow background, you need to write $(197_yellow)%a$(end). Note +## that for standard colors this is interchangable with attributes +## listed above. +## +## Note: colors can be nested. +## +# +#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9} +# +#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f} +# +#song_library_format = {%n - }{%t}|{%f} +# +# +#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b +# +#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D} +# +#now_playing_prefix = $b +# +#now_playing_suffix = $/b +# +#browser_playlist_prefix = "$2playlist$9 " +# +#selected_item_prefix = $6 +# +#selected_item_suffix = $9 +# +#modified_item_prefix = $3> $9 +# +## +## Note: attributes are not supported for the following variables. +## +#song_window_title_format = {%a - }{%t}|{%f} +## +## Note: Below variables are used for sorting songs in browser. +## The sort mode determines how songs are sorted, and can be used +## in combination with a sort format to specify a custom sorting format. +## Available values for browser_sort_mode are "name", "mtime", "format" +## and "noop". +## +# +#browser_sort_mode = name +# +#browser_sort_format = {%a - }{%t}|{%f} {(%l)} +# +##### columns settings ##### +## +## syntax of song columns list format is "column column etc." +## +## - syntax for each column is: +## +## (width of the column)[color of the column]{displayed tag} +## +## Note: Width is by default in %, if you want a column to +## have fixed size, add 'f' after the value, e.g. (10)[white]{a} +## will be the column that take 10% of screen (so the real width +## will depend on actual screen size), whereas (10f)[white]{a} +## will take 10 terminal cells, no matter how wide the screen is. +## +## - color is optional (if you want the default one, +## leave the field empty). +## +## Note: You can give a column additional attributes by putting appropriate +## character after displayed tag character. Available attributes are: +## +## - r - column will be right aligned +## - E - if tag is empty, empty tag marker won't be displayed +## +## You can also: +## +## - give a column custom name by putting it after attributes, +## separated with character ':', e.g. {lr:Length} gives you +## right aligned column of lengths named "Length". +## +## - define sequence of tags, that have to be displayed in case +## predecessor is empty in a way similar to the one in classic +## song format, i.e. using '|' character, e.g. {a|c|p:Owner} +## creates column named "Owner" that tries to display artist +## tag and then composer and performer if previous ones are +## not available. +## +# +#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l} +# +##### various settings ##### +# +## +## Note: Custom command that will be executed each +## time song changes. Useful for notifications etc. +## +#execute_on_song_change = "" +# +#playlist_show_mpd_host = no +# +#playlist_show_remaining_time = no +# +#playlist_shorten_total_times = no +# +#playlist_separate_albums = no +# +## +## Note: Possible display modes: classic, columns. +## +#playlist_display_mode = columns +# +#browser_display_mode = classic +# +#search_engine_display_mode = classic +# +#playlist_editor_display_mode = classic +# +#discard_colors_if_item_is_selected = yes +# +#incremental_seeking = yes +# +#seek_time = 1 +# +#volume_change_step = 2 +# +#autocenter_mode = no +# +#centered_cursor = no +# +## +## Note: You can specify third character which will +## be used to build 'empty' part of progressbar. +## +#progressbar_look = => +progressbar_look = "─╼╶" +#progressbar_look = "─⊙╶" +# +#progressbar_boldness = yes +# +## Available values: database, playlist. +## +#default_place_to_search_in = database +# +## Available values: classic, alternative. +## +#user_interface = classic +# +#data_fetching_delay = yes +# +## Available values: artist, album_artist, date, genre, composer, performer. +## +#media_library_primary_tag = artist +# +## Available values: wrapped, normal. +## +#default_find_mode = wrapped +# +#default_tag_editor_pattern = %n - %t +# +#header_visibility = yes +# +#statusbar_visibility = yes +# +#titles_visibility = yes +# +#header_text_scrolling = yes +# +#cyclic_scrolling = no +# +#lines_scrolled = 2 +# +#follow_now_playing_lyrics = no +# +#fetch_lyrics_for_current_song_in_background = no +# +#store_lyrics_in_song_dir = no +# +#generate_win32_compatible_filenames = yes +# +#allow_for_physical_item_deletion = no +# +## +## Note: If you set this variable, ncmpcpp will try to +## get info from last.fm in language you set and if it +## fails, it will fall back to english. Otherwise it will +## use english the first time. +## +## Note: Language has to be expressed as an ISO 639 alpha-2 code. +## +#lastfm_preferred_language = en +# +#show_hidden_files_in_local_browser = no +# +## +## How shall screen switcher work? +## +## - "previous" - switch between the current and previous screen. +## - "screen1,...,screenN" - switch between given sequence of screens. +## +## Screens available for use: help, playlist, browser, search_engine, +## media_library, playlist_editor, tag_editor, outputs, visualizer, clock. +## +#screen_switcher_mode = playlist, browser +# +## +## Note: You can define startup screen +## by choosing screen from the list above. +## +#startup_screen = playlist +# +## +## Note: You can define startup slave screen +## by choosing screen from the list above or +## an empty value for no slave screen. +## +#startup_slave_screen = "" +# +#startup_slave_screen_focus = no +# +## +## Default width of locked screen (in %). +## Acceptable values are from 20 to 80. +## +# +#locked_screen_width_part = 50 +# +#ask_for_locked_screen_width_part = yes +# +#jump_to_now_playing_song_at_start = yes +# +#ask_before_clearing_playlists = yes +# +#clock_display_seconds = no +# +#display_volume_level = yes +# +#display_bitrate = no +# +#display_remaining_time = no +# +## Available values: none, basic, extended, perl. +## +#regular_expressions = perl +# +## +## Note: If below is enabled, ncmpcpp will ignore leading +## "The" word while sorting items in browser, tags in +## media library, etc. +## +#ignore_leading_the = no +# +#block_search_constraints_change_if_items_found = yes +# +#mouse_support = yes +# +#mouse_list_scroll_whole_page = yes +# +#empty_tag_marker = <empty> +# +#tags_separator = " | " +# +#tag_editor_extended_numeration = no +# +#media_library_sort_by_mtime = no +# +#enable_window_title = yes +# +## +## Note: You can choose default search mode for search +## engine. Available modes are: +## +## - 1 - use mpd built-in searching (no regexes, pattern matching) +## - 2 - use ncmpcpp searching (pattern matching with support for regexes, +## but if your mpd is on a remote machine, downloading big database +## to process it can take a while +## - 3 - match only exact values (this mode uses mpd function for searching +## in database and local one for searching in current playlist) +## +# +#search_engine_default_search_mode = 1 +# +#external_editor = nano +# +## Note: set to yes if external editor is a console application. +## +#use_console_editor = yes +# +##### colors definitions ##### +## +## It is possible to set a background color by setting a color +## value "<foreground>_<background>", e.g. red_black will set +## foregound color to red and background color to black. +## +## In addition, for terminals that support 256 colors it +## is possible to set one of them by using a number in range +## [1, 256] instead of color name, e.g. numerical value +## corresponding to red_black is 2_1. To find out if the +## terminal supports 256 colors, run ncmpcpp and check out +## the bottom of the help screen for list of available colors +## and their numerical values. +## +## Note: due to technical limitations of ncurses, if 256 colors +## are used, it is possible to either use only the colors with +## default background color, or all pairs from 1_1 up to 254_127, +## depending on the ncurses version used. +## +# +#colors_enabled = yes +# +#empty_tag_color = cyan +# +#header_window_color = default +# +#volume_color = default +# +#state_line_color = default +# +#state_flags_color = default +# +#main_window_color = yellow +# +#color1 = white +# +#color2 = green +# +#main_window_highlight_color = yellow +# +#progressbar_color = black +# +#progressbar_elapsed_color = green +# +#statusbar_color = default +# +#alternative_ui_separator_color = black +# +#active_column_color = red +# +#window_border_color = green +# +#active_window_border = red +# |