diff options
50 files changed, 1888 insertions, 2303 deletions
diff --git a/.Xresources b/.Xresources new file mode 100644 index 0000000..5b878f1 --- /dev/null +++ b/.Xresources @@ -0,0 +1,3 @@ +#include ".Xresources.d/fonts" +#include ".Xresources.d/emacs" +#include ".Xresources.d/rxvt-unicode" diff --git a/.Xresources.d/emacs b/.Xresources.d/emacs new file mode 100644 index 0000000..e415330 --- /dev/null +++ b/.Xresources.d/emacs @@ -0,0 +1,22 @@ +Emacs.menuBar: off +Emacs.toolBar: off +Emacs.verticalScrollBars: off +Emacs.cursorBlink: off +Emacs.FontBackend: ftcrhb,x +!Emacs.FontBackend: xft,x +! Emacs.font: Ubuntu Mono-12 +! Emacs.font: Triplicate T4C-11 +! Emacs.font: Ubuntu Mono-10.5 +! Emacs.font: Ubuntu Mono-12 +! Emacs.font: Iosevka-11 + +! Emacs.font: Fira Mono:size=15 +! Emacs.font: DejaVu Sans Mono:size=15 +! Emacs.font: Inconsolata:size=17 +! Emacs.font: Inconsolata:size=16 +! Emacs.font: Inconsolata LGC:size=14 +! Emacs.font: Source Code Pro Medium-10.5 +Emacs.font: Source Code Pro Medium:size=14 +!Emacs.font: Vazir:size=14 +! Emacs.font: Ubuntu Mono:size=16 +! Emacs.font: Iosevka:size=16 diff --git a/.Xresources.d/fonts b/.Xresources.d/fonts new file mode 100644 index 0000000..fc02922 --- /dev/null +++ b/.Xresources.d/fonts @@ -0,0 +1,8 @@ +Xft.lcdfilter: lcddefault +Xft.antialias: true +Xft.autohint: 0 +Xft.hinting: true +Xft.hintstyle: hintslight +! Xft.hintstyle: hintfull +Xft.rgba: rgb +Xft.dpi: 96 diff --git a/.Xresources.d/rxvt-unicode b/.Xresources.d/rxvt-unicode new file mode 100644 index 0000000..cc5f766 --- /dev/null +++ b/.Xresources.d/rxvt-unicode @@ -0,0 +1,193 @@ +! Font +URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true +URxvt.boldFont: xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold +URxvt.italicFont: xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic +URxvt.bolditalicFont: xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic + +URxvt.xftAntialias: true +URxvt.letterSpace: -1 + +!URxvt.depth: 0 +!URxvt.loginShell: true +!URxvt*buffered: false +URxvt.saveLines: 100000 +URxvt.internalBorder: 3 +URxvt.lineSpace: 0 +URxvt.scrollBar: false +URxvt.scrollStyle: rxvt +URxvt*scrollTtyOutput: false +URxvt*scrollWithBuffer: true +URxvt*scrollTtyKeypress: true +URxvt.keysym.Shift-Up: command:\033]720;1\007 +URxvt.keysym.Shift-Down: command:\033]721;1\007 + +URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select +URxvt.url-select.launcher: firefox +URxvt.url-select.underline: true +URxvt.keysym.M-u: perl:url-select:select_next +URxvt.keysym.M-Escape: perl:keyboard-select:activate +URxvt.keysym.M-s: perl:keyboard-select:search +URxvt.url-launcher: /usr/bin/abrowser +URxvt.matcher.button: 1 +! URxvt.iso14755: false +! URxvt.iso14755_53: false +! URxvt.keysym.M-c: perl:clipboard:copy +! URxvt.keysym.M-v: perl:clipboard:paste +URxvt.keysym.M-c: eval:selection_to_clipboard +URxvt.keysym.M-v: eval:paste_clipboard +URxvt.keysym.C-A-V: perl:clipboard:paste_escaped +! URxvt.keysym.Shift-Control-C: eval:selection_to_clipboard +! URxvt.keysym.Shift-Control-V: eval:paste_clipboard +URxvt.keysym.C-Up: font-size:increase +URxvt.keysym.C-Down: font-size:decrease +URxvt.keysym.C-S-Up: font-size:incglobal +URxvt.keysym.C-S-Down: font-size:decglobal +URxvt.keysym.C-equal: font-size:reset +!URxvt.keysym.C-question: font-size:show + +!URxvt.iconFile: /usr/share/icons/elementary-xfce/apps/48/terminal.png + +!urxvt*foreground: white +!urxvt*background: black + +!*color0: #2E3436 +!*color1: #a40000 +!*color2: #4E9A06 +!*color3: #C4A000 +!*color4: #3465A4 +!*color5: #75507B +!*color6: #ce5c00 +!*color7: #babdb9 +!*color8: #555753 +!*color9: #EF2929 +!*color10: #8AE234 +!*color11: #FCE94F +!*color12: #729FCF +!*color13: #AD7FA8 +!*color14: #fcaf3e +!*color15: #EEEEEC + +!URxvt.foreground: #C8C8C8 +!URxvt.background: #FFFFFF + +!! black +!*color0: #2E3436 +!*color8: #555753 +!! red +!*color1: #a40000 +!*color9: #EF2929 +!! green +!*color2: #4E9A06 +!*color10: #8AE234 +!! yellow +!*color3: #C4A000 +!*color11: #FCE94F +!! blue +!*color4: #3465A4 +!*color12: #729FCF +!! purple +!*color5: #75507B +!*color13: #AD7FA8 +!! orange (replaces cyan) +!*color6: #ce5c00 +!*color14: #fcaf3e +!! white +!*color7: #babdb9 +!*color15: #EEEEEC + + +! ! Solarized +! ! Base16 Solarized Light +! ! Scheme: Ethan Schoonover (http://ethanschoonover.com/solarized) + +! #define base00 #fdf6e3 +! #define base01 #eee8d5 +! #define base02 #93a1a1 +! #define base03 #839496 +! #define base04 #657b83 +! #define base05 #586e75 +! #define base06 #073642 +! #define base07 #002b36 +! #define base08 #dc322f +! #define base09 #cb4b16 +! #define base0A #b58900 +! #define base0B #859900 +! #define base0C #2aa198 +! #define base0D #268bd2 +! #define base0E #6c71c4 +! #define base0F #d33682 + +! *foreground: base05 +! #ifdef background_opacity +! *background: [background_opacity]base00 +! #else +! *background: base00 +! #endif +! *cursorColor: base05 + +! *color0: base00 +! *color1: base08 +! *color2: base0B +! *color3: base0A +! *color4: base0D +! *color5: base0E +! *color6: base0C +! *color7: base05 + +! *color8: base03 +! *color9: base08 +! *color10: base0B +! *color11: base0A +! *color12: base0D +! *color13: base0E +! *color14: base0C +! *color15: base07 + +! ! Note: colors beyond 15 might not be loaded (e.g., xterm, urxvt), +! ! use 'shell' template to set these if necessary +! *color16: base09 +! *color17: base0F +! *color18: base01 +! *color19: base02 +! *color20: base04 +! *color21: base06 + + +! Tango colour theme for rxvt-unicode +URxvt.background: #FFFFFF +URxvt.foreground: #000000 + +! Black +URxvt.color0: #2E3436 +URxvt.color8: #757773 + +! Red +URxvt.color1: #CC0000 +URxvt.color9: #EF2929 + +! Green +URxvt.color2: #4E9A06 +URxvt.color10: #8AE234 + +! Yellow +URxvt.color3: #C4A000 +URxvt.color11: #FCE94F + +! Blue +URxvt.color4: #3465A4 +URxvt.color12: #729FCF + +! Magenta +URxvt.color5: #75507B +URxvt.color13: #AD7FA8 + +!! Cyan +!URxvt.color6: #06989A +!URxvt.color14: #34E2E2 +! orange (replaces cyan) +,*color6: #ce5c00 +,*color14: #fcaf3e + +! White +URxvt.color7: #D3D7CF +URxvt.color15: #EEEEEC @@ -0,0 +1,121 @@ +# Bash initialization for interactive non-login shells and +# for remote shells (info "(bash) Bash Startup Files"). + +# Export 'SHELL' to child processes. Programs such as 'screen' +# honor it and otherwise use /bin/sh. +export SHELL + +if [[ $- != *i* ]] +then + # We are being invoked from a non-interactive shell. If this + # is an SSH session (as in "ssh host command"), source + # /etc/profile so we get PATH and other essential variables. + [[ -n "$SSH_CLIENT" ]] && source /etc/profile + + # Don't do anything else. + return +fi + +if [ -n "$IS_GUIX_SYSTEM" ]; then + # Source the system-wide file. + source /etc/bashrc +fi + +# from https://unix.stackexchange.com/a/55935 +b_prompt() { + cwd=$(sed -e "s:$HOME:~:" -e "s:\(\.\?[^/]\)[^/]*/:\1/:g" <<<$PWD) + printf $cwd +} + +if [ $(id -u) == "0" ]; then + PS1='`printf "\[\e[1;31m\]\$\[\e[00m\]"` ' +else + PS1='\$ ' +fi +PS1="\u@\h:\w/`[ -n "$GUIX_ENVIRONMENT" ] && printf \" [env]\"`\n$PS1" + +# set terminal title +PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME}: $(b_prompt)\007"' + +# i-beam cursor +# echo -e "\033[5 q" # blinking +echo -e "\033[6 q" # non-blinking + +# various bash tweaks +# append to the history file, don't overwrite it +shopt -s histappend +shopt -s cmdhist +# check the window size after each command and, if necessary, +# update the values of LINES and COLUMNS. +shopt -s checkwinsize +# If set, the pattern "**" used in a pathname expansion context will +# match all files and zero or more directories and subdirectories. +#shopt -s globstar +# for setting history length see HISTSIZE and HISTFILESIZE in bash(1) +HISTSIZE= +HISTFILESIZE= +# don't put duplicate lines or lines starting with space in the +# history. +HISTCONTROL=ignoreboth +# ignore a few very common commands and don't add them to history +HISTIGNORE='ls:l:s:g:[bf]g:history' +HISTTIMEFORMAT='%F %T ' +stty stop "" + +# aliases +alias ls='ls -p --color=auto' +alias l='ls -lh' # long format and human-readable sizes +alias ll='l -A' # long format, all files +alias dir='dir --color=auto' +alias vdir='vdir --color=auto' +alias grep='grep --color=auto' +alias fgrep='fgrep --color=auto' +alias egrep='egrep --color=auto' +alias mpv="mpv --ytdl-format mp4" +alias mv="mv -iv" +alias cp="cp -iv" +alias mbsync='mbsync -c "$XDG_CONFIG_HOME"/isync/mbsyncrc' +alias getmail='getmail --getmaildir "$XDG_CONFIG_HOME"/getmail --rcfile getmailrc' +alias m="mbsync csclub; mbsync uwaterloo; mbsync shemshak; mbsync gnub" +alias best="youtube-dl -f best" +alias e="$EDITOR" +alias se="SUDO_EDITOR=\"emacsclient\" sudo -e" + +aur() { + cd ~/usr/builds + [ -d ${1} ] || git clone https://aur.archlinux.org/${1}.git + cd ${1} +} + +function t { + cd $(mktemp -d /tmp/$1.XXXX) +} + +# separate alias definitions file, if exists +if [ -f ~/.bash_aliases ]; then + . ~/.bash_aliases +fi + +# enable programmable completion features (not needed if already +# enabled in /etc/bash.bashrc and if /etc/profile sources +# /etc/bash.bashrc). +if ! shopt -oq posix; then + if [ -f /usr/share/bash-completion/bash_completion ]; then + . /usr/share/bash-completion/bash_completion + elif [ -f /etc/bash_completion ]; then + . /etc/bash_completion + fi +fi + +# source Guix shell config dirs, for vte.sh and bash completions +GUIX_PROFILES=("${HOME}/.guix-profile" + "${HOME}/.config/guix/current") +for profile in "${GUIX_PROFILES[@]}"; do + for dir in "${profile}/etc/bash_completion.d" "${profile}/etc/profile.d"; do + if [ -d "${dir}" ]; then + for f in "${dir}"/*; do + . $f + done + fi + done +done diff --git a/.config/fontconfig/fonts.conf b/.config/fontconfig/fonts.conf new file mode 100644 index 0000000..083ece3 --- /dev/null +++ b/.config/fontconfig/fonts.conf @@ -0,0 +1,38 @@ +<?xml version="1.0"?> +<!DOCTYPE fontconfig SYSTEM "fonts.dtd"> +<fontconfig> + <match target="font"> + <edit mode="assign" name="rgba"> + <const>rgb</const> + </edit> + </match> + <match target="font"> + <edit mode="assign" name="hinting"> + <bool>true</bool> + </edit> + </match> + <match target="font"> + <edit mode="assign" name="hintstyle"> + <const>hintslight</const> + </edit> + </match> + <match target="font"> + <edit mode="assign" name="antialias"> + <bool>true</bool> + </edit> + </match> + <match target="font"> + <edit mode="assign" name="lcdfilter"> + <const>lcddefault</const> + </edit> + </match> + <dir>~/.fonts</dir> + + <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) --> + <alias binding="same"> + <family>Helvetica</family> + <prefer> + <family>Liberation Sans</family> + </prefer> +</alias> +</fontconfig> diff --git a/.config/getmail/getmailrc b/.config/getmail/getmailrc new file mode 100644 index 0000000..363f354 --- /dev/null +++ b/.config/getmail/getmailrc @@ -0,0 +1,23 @@ +[retriever] +type = SimplePOP3SSLRetriever +server = fencepost.gnu.org +username = bandali +password_command = ("gpg", "--no-tty", "-q", "-d", "/home/bandali/.passwd/gnu.gpg") +port = 995 +use_apop = True + +[destination] +type = Maildir +path = ~/mail/gnu.local/bandali/mail/ + +# [destination] +# type = MDA_external +# path = /usr/lib/dovecot/deliver +# arguments = ('-e', '-f', '%(sender)', '-d', 'bandali@gnu.local') + +[options] +read_all = false +delete_after = 1 +# delete = true +received = false +delivered_to = false diff --git a/.config/git/config b/.config/git/config new file mode 100644 index 0000000..2cef2a2 --- /dev/null +++ b/.config/git/config @@ -0,0 +1,66 @@ +[user] + name = Amin Bandali + email = bandali@gnu.org + signingkey = BE6273738E616D6D1B3A08E8A21A020248816103 + +[commit] + gpgsign = true + +# [format] +# signoff = true + +[core] + autocrlf = input # CRLF -> LF on commit + editor = emacsclient -t + pager = "less" + +[mailmap] + file = ~/.config/git/mailmap + +[alias] + git = !exec git # handle nested git calls, e.g. git git status + aliases = config --get-regexp '^alias\\.' + a = add + s = status + sl = status --long + c = checkout + cb = checkout -b + b = branch + r = rebase + p = pull + pr = pull --rebase + ps = push + psf = push --force + nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f" + nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f" + +[color] + ui = auto +[color "status"] + added = green bold + changed = red bold + untracked = red bold +[color "branch"] + current = green bold + remote = magenta bold +[color "diff"] + new = green bold + old = red bold + +# [status] +# # showUntrackedFiles = all +# short=true +# branch=true + +[github] + user = notbandali + +[sendemail] + smtpuser = bandali + smtpserver = fencepost.gnu.org + smtpserverport = 587 + smtpencryption = tls + annotate = yes + +[transfer] + fsckObjects = true diff --git a/.config/git/ignore b/.config/git/ignore new file mode 100644 index 0000000..1a03171 --- /dev/null +++ b/.config/git/ignore @@ -0,0 +1,8 @@ +*.orig +*.py[co] +*.sublime-workspace +*~ +.DS_Store +*.elc +*-autoloads.el +TAGS diff --git a/.config/git/mailmap b/.config/git/mailmap new file mode 100644 index 0000000..2c03291 --- /dev/null +++ b/.config/git/mailmap @@ -0,0 +1,5 @@ +<bandali@gnu.org> <mab@gnu.org> +<bandali@gnu.org> <amin@gnu.org> +<bandali@gnu.org> <aminb@gnu.org> +<bandali@gnu.org> <amin@aminb.org> +<bandali@gnu.org> <me@aminb.org> diff --git a/.config/gtk-3.0/settings.ini b/.config/gtk-3.0/settings.ini new file mode 100644 index 0000000..bb12559 --- /dev/null +++ b/.config/gtk-3.0/settings.ini @@ -0,0 +1,11 @@ +[Settings] +gtk-icon-theme-name = Adwaita +# gtk-theme-name = Adwaita + +gtk-theme-name = Xfce +# gtk-theme-name = Arc-Darker +# gtk-theme-name = Numix-ArchBlue + +gtk-font-name = Roboto 10 +# gtk-font-name = Source Code Variable Medium 10 +# gtk-key-theme-name = Emacs diff --git a/.config/guix/channels.scm b/.config/guix/channels.scm new file mode 100644 index 0000000..9daf2a8 --- /dev/null +++ b/.config/guix/channels.scm @@ -0,0 +1,6 @@ +(list (channel + (name 'guix) ; https://git.savannah.gnu.org/git/guix.git + (url "file:///home/bandali/src/git/guix")) + (channel + (name 'guix-bandali) ; https://git.sr.ht/~bandali/guix-bandali + (url "file:///home/bandali/src/git/guix-bandali"))) diff --git a/.config/guix/manifest/README b/.config/guix/manifest/README new file mode 100644 index 0000000..694b62b --- /dev/null +++ b/.config/guix/manifest/README @@ -0,0 +1,9 @@ +To install/update the packages of the default profile, use + + guix package -m $MY_GUIX_MANIFESTS/main.scm + +and for other profiles, use + + guix package -m $MY_GUIX_MANIFESTS/name.scm -p $MY_GUIX_PROFILES/name/name + +where `name' is the name of the profile (e.g. `doc', `media', ...). diff --git a/.config/guix/manifest/doc.scm b/.config/guix/manifest/doc.scm new file mode 100644 index 0000000..b732864 --- /dev/null +++ b/.config/guix/manifest/doc.scm @@ -0,0 +1,8 @@ +(specifications->manifest + '("libreoffice" + "texlive-amsfonts" + "texlive-base" + "texlive-latex-listings" + ;; "texlive-palatino" + "texlive-xcolor" +)) diff --git a/.config/guix/manifest/main.scm b/.config/guix/manifest/main.scm new file mode 100644 index 0000000..8917d27 --- /dev/null +++ b/.config/guix/manifest/main.scm @@ -0,0 +1,114 @@ +(specifications->manifest + '("alsa-utils" + "bash-completion" + "cpufrequtils" + "cpupower" + "cvs" + "dunst" + "emacs" + "emacs-alert" + "emacs-amx" + "emacs-async" + "emacs-biblio-git" + "emacs-boxquote" + "emacs-company" + "emacs-company-ebdb" + "emacs-crux" + "emacs-dash" + "emacs-debbugs" + "emacs-diff-hl" + "emacs-dmenu" + "emacs-doom-themes" + "emacs-ebdb" + "emacs-emmet-mode" + ;; "emacs-emojify" + "emacs-erc-hl-nicks" + "emacs-erc-scrolltoplace" + "emacs-eshell-up" + "emacs-exec-path-from-shell" + "emacs-expand-region" + "emacs-exwm" + "emacs-exwm-edit" + "emacs-flycheck" + "emacs-geiser" + ;; "emacs-gnus-harvest" + "emacs-guix" + "emacs-helpful" + "emacs-hl-todo" + "emacs-ivy" + "emacs-magit" + "emacs-message-x" + "emacs-minions" + ;; "emacs-multi-term" + "emacs-multiple-cursors" + "emacs-mwim" + ;; "emacs-next" + ;; "emacs-next-delight" + "emacs-no-littering" + "emacs-org" + "emacs-org-contrib" + "emacs-org-ref" + "emacs-orgalist" + "emacs-page-break-lines" + "emacs-pass" + "emacs-pinentry" + "emacs-projectile" + "emacs-shrink-path-git" + "emacs-smart-mode-line" + "emacs-typo" + "emacs-unkillable-scratch" + "emacs-use-package" + "emacs-web-mode" + "emacs-which-key" + "emacs-yasnippet" + "emacs-znc-git" + "font-adobe-source-code-pro" + "font-gnu-freefont-ttf" + "font-google-roboto" + "font-liberation" + "font-linuxlibertine" + "font-sil-gentium" + "font-tex-gyre" + ;; "font-ubuntu" + "font-vazir" + "getmail" + "gettext" + "git" + "git:send-email" + "gnupg" + "guile" + "haunt" + "htop" + "hunspell" + "hunspell-dict-en-ca" + "hunspell-dict-en-us" + "isync" + "light" + "msmtp" + "ncdu" + "notmuch" + "openjdk" + "openssh" + "openssl" + "pass-otp" + "password-store" + "pasystray" + "pinentry-emacs" + "poppler" ; for 'pdffonts' + "rofi" + "rofi-pass" + "rsync" + "rxvt-unicode" + "screen" + "scrot" + "setxkbmap" + "strace" + "thinkfan" + "unzip" + "wget" + "xdg-user-dirs" + ;; "xkbcomp" + "xmodmap" + "xrdb" + "xset" + "xsetroot")) diff --git a/.config/guix/manifest/media.scm b/.config/guix/manifest/media.scm new file mode 100644 index 0000000..f8ff541 --- /dev/null +++ b/.config/guix/manifest/media.scm @@ -0,0 +1,6 @@ +(specifications->manifest + '("audacity" + "gimp" + "inkscape" + "mpv" + "youtube-dl")) diff --git a/.config/guix/manifest/web.scm b/.config/guix/manifest/web.scm new file mode 100644 index 0000000..6e5fd34 --- /dev/null +++ b/.config/guix/manifest/web.scm @@ -0,0 +1,3 @@ +(specifications->manifest + '("icecat" + "rtv")) diff --git a/.config/guix/system/chaman.scm b/.config/guix/system/chaman.scm new file mode 100644 index 0000000..7d9f13b --- /dev/null +++ b/.config/guix/system/chaman.scm @@ -0,0 +1,90 @@ +(use-modules (gnu) + (gnu packages certs) ; for nss-certs + (gnu packages emacs-xyz) ; for exwm + (gnu packages linux)) ; for powertop +(use-service-modules admin desktop mail networking pm ssh xorg) + +(operating-system + (host-name "chaman") + (locale "en_CA.utf8") + (timezone "Canada/Eastern") + (keyboard-layout + (keyboard-layout "us" "basic")) + (bootloader + (bootloader-configuration + (bootloader grub-bootloader) + (target "/dev/sda") + (keyboard-layout keyboard-layout))) + (mapped-devices + (list (mapped-device + (source + (uuid "283da85e-2c84-47e6-a8ca-20f4e8efb806")) + (target "groot") + (type luks-device-mapping)) + (mapped-device + (source + (uuid "017ddebc-c2c3-4a0a-bda4-d47ec0bc67f0")) + (target "data") + (type luks-device-mapping)))) + (file-systems + (cons* (file-system + (mount-point "/") + (device "/dev/mapper/groot") + (type "ext4") + (dependencies mapped-devices)) + (file-system + (mount-point "/data") + (device "/dev/mapper/data") + (type "ext4") + (dependencies mapped-devices)) + %base-file-systems)) + (users + (cons* (user-account + (name "bandali") + (group "users") + (home-directory "/home/bandali") + (supplementary-groups + '("wheel" "netdev" "audio" "video"))) + %base-user-accounts)) + (packages + (cons* nss-certs + emacs-exwm + %base-packages)) + (services + (cons* + (service xfce-desktop-service-type) + (set-xorg-configuration + (xorg-configuration + (keyboard-layout keyboard-layout))) + (dovecot-service + #:config + (dovecot-configuration + ;; (log-path "/dev/stderr") + (protocols (list (protocol-configuration + (name "imap")))) + (ssl? "no") + (listen '("127.0.0.1")) + (disable-plaintext-auth? #f) + (auth-mechanisms '("plain")) + (postmaster-address "bandali@gnu.local") + (mail-location "maildir:/home/bandali/mail/%d/%n/mail") + (userdbs (list (userdb-configuration + (driver "static") + (args (list "uid=bandali" "gid=users" "home=/home/bandali/mail/%d/%n"))))) + (passdbs (list (passdb-configuration + (driver "passwd-file") + (args (list "/data/dovecot-passwd"))))))) + (service rottlog-service-type) + (service thermald-service-type) + (service tlp-service-type + (tlp-configuration + (cpu-boost-on-ac? #t) + (sound-power-save-on-bat 0) + (sound-power-save-controller? #f) + ;; (usb-blacklist "0e8f:00a8") ;for some reason doesn't seem to work + (usb-autosuspend? #f))) + (simple-service 'my-powertop-auto-tune activation-service-type + #~(zero? (system* #$(file-append powertop "/sbin/powertop") + "--auto-tune"))) + (simple-service 'light-udev-rules udev-service-type (list light)) + %desktop-services))) diff --git a/.config/isync/mbsyncrc b/.config/isync/mbsyncrc new file mode 100644 index 0000000..7915a05 --- /dev/null +++ b/.config/isync/mbsyncrc @@ -0,0 +1,104 @@ +# Global defaults +CopyArrivalDate yes +Create Both +Expunge Both + +###### +IMAPAccount shemshak +Host mail.shemshak.org +User bandali@shemshak.org +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/shemshak.gpg" +SSLType IMAPS + +IMAPStore shemshak-remote +Account shemshak + +IMAPAccount shemshak-local +Host 127.0.0.1 +Port 143 +User bandali@shemshak.local +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/shemshak-local.gpg" +SSLType None + +IMAPStore shemshak-local +Account shemshak-local + +Channel shemshak +Master :shemshak-remote: +Slave :shemshak-local: +Patterns * + +###### +IMAPAccount gnub +Host mail.shemshak.org +User gnu@bndl.org +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/gnub.gpg" +SSLType IMAPS + +IMAPStore gnub-remote +Account gnub + +IMAPAccount gnub-local +Host 127.0.0.1 +Port 143 +User bandali@gnu.local +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/gnub-local.gpg" +SSLType None + +IMAPStore gnub-local +Account gnub-local + +Channel gnub +Master :gnub-remote: +Slave :gnub-local: +Patterns * + +###### +IMAPAccount uwaterloo +Host connect.uwaterloo.ca +User abandali +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg" +SSLType IMAPS + +IMAPStore uwaterloo-remote +Account uwaterloo + +IMAPAccount uwaterloo-local +Host 127.0.0.1 +Port 143 +User abandali@uwaterloo.local +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-local.gpg" +SSLType None + +IMAPStore uwaterloo-local +Account uwaterloo-local + +Channel uwaterloo +Master :uwaterloo-remote: +Slave :uwaterloo-local: +Patterns * + +###### +IMAPAccount csclub +Host mail.csclub.uwaterloo.ca +User abandali +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub.gpg" +SSLType IMAPS + +IMAPStore csclub-remote +Account csclub + +IMAPAccount csclub-local +Host 127.0.0.1 +Port 143 +User abandali@csclub.uwaterloo.local +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-local.gpg" +SSLType None + +IMAPStore csclub-local +Account csclub-local + +Channel csclub +Master :csclub-remote: +Slave :csclub-local: +Patterns * diff --git a/.config/latexmk/latexmkrc b/.config/latexmk/latexmkrc new file mode 100644 index 0000000..3731a88 --- /dev/null +++ b/.config/latexmk/latexmkrc @@ -0,0 +1,11 @@ +$pdf_previewer = "start zathura %O %S"; +$clean_ext = "aux out"; + +# $pdf_update_method = 4; +# $pdf_update_command = "zathura %O %S"; + +# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs +# by Ctrl+click in the PDF. +# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex +# editor. +# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S'; diff --git a/.config/mpd/mpd.conf b/.config/mpd/mpd.conf new file mode 100644 index 0000000..b1e1e79 --- /dev/null +++ b/.config/mpd/mpd.conf @@ -0,0 +1,407 @@ +# An example configuration file for MPD. +# Read the user manual for documentation: http://www.musicpd.org/doc/user/ + + +# Files and directories ####################################################### +# +# This setting controls the top directory which MPD will search to discover the +# available audio files and add them to the daemon's online database. This +# setting defaults to the XDG directory, otherwise the music directory will be +# be disabled and audio files will only be accepted over ipc socket (using +# file:// protocol) or streaming files over an accepted protocol. +# +music_directory "~/usr/music" +# +# This setting sets the MPD internal playlist directory. The purpose of this +# directory is storage for playlists created by MPD. The server will use +# playlist files not created by the server but only if they are in the MPD +# format. This setting defaults to playlist saving being disabled. +# +playlist_directory "~/.mpd/playlists" +# +# This setting sets the location of the MPD database. This file is used to +# load the database at server start up and store the database while the +# server is not up. This setting defaults to disabled which will allow +# MPD to accept files over ipc socket (using file:// protocol) or streaming +# files over an accepted protocol. +# +db_file "~/.mpd/database" +# +# These settings are the locations for the daemon log files for the daemon. +# These logs are great for troubleshooting, depending on your log_level +# settings. +# +# The special value "syslog" makes MPD use the local syslog daemon. This +# setting defaults to logging to syslog, otherwise logging is disabled. +# +log_file "~/.mpd/log" +# +# This setting sets the location of the file which stores the process ID +# for use of mpd --kill and some init scripts. This setting is disabled by +# default and the pid file will not be stored. +# +pid_file "~/.mpd/pid" +# +# This setting sets the location of the file which contains information about +# most variables to get MPD back into the same general shape it was in before +# it was brought down. This setting is disabled by default and the server +# state will be reset on server start up. +# +state_file "~/.mpd/state" +# +# The location of the sticker database. This is a database which +# manages dynamic information attached to songs. +# +sticker_file "~/.mpd/sticker.sql" +# +############################################################################### + + +# General music daemon options ################################################ +# +# This setting specifies the user that MPD will run as. MPD should never run as +# root and you may use this setting to make MPD change its user ID after +# initialization. This setting is disabled by default and MPD is run as the +# current user. +# +#user "nobody" +# +# This setting specifies the group that MPD will run as. If not specified +# primary group of user specified with "user" setting will be used (if set). +# This is useful if MPD needs to be a member of group such as "audio" to +# have permission to use sound card. +# +#group "nogroup" +# +# This setting sets the address for the daemon to listen on. Careful attention +# should be paid if this is assigned to anything other then the default, any. +# This setting can deny access to control of the daemon. Not effective if +# systemd socket activiation is in use. +# +# For network +#bind_to_address "any" +# +# And for Unix Socket +#bind_to_address "~/.mpd/socket" +# +# This setting is the TCP port that is desired for the daemon to get assigned +# to. +# +#port "6600" +# +# This setting controls the type of information which is logged. Available +# setting arguments are "default", "secure" or "verbose". The "verbose" setting +# argument is recommended for troubleshooting, though can quickly stretch +# available resources on limited hardware storage. +# +#log_level "default" +# +# If you have a problem with your MP3s ending abruptly it is recommended that +# you set this argument to "no" to attempt to fix the problem. If this solves +# the problem, it is highly recommended to fix the MP3 files with vbrfix +# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which +# point gapless MP3 playback can be enabled. +# +#gapless_mp3_playback "yes" +# +# Setting "restore_paused" to "yes" puts MPD into pause mode instead +# of starting playback after startup. +# +#restore_paused "no" +# +# This setting enables MPD to create playlists in a format usable by other +# music players. +# +#save_absolute_paths_in_playlists "no" +# +# This setting defines a list of tag types that will be extracted during the +# audio file discovery process. The complete list of possible values can be +# found in the user manual. +#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc" +# +# This setting enables automatic update of MPD's database when files in +# music_directory are changed. +# +#auto_update "yes" +# +# Limit the depth of the directories being watched, 0 means only watch +# the music directory itself. There is no limit by default. +# +#auto_update_depth "3" +# +############################################################################### + + +# Symbolic link behavior ###################################################### +# +# If this setting is set to "yes", MPD will discover audio files by following +# symbolic links outside of the configured music_directory. +# +#follow_outside_symlinks "yes" +# +# If this setting is set to "yes", MPD will discover audio files by following +# symbolic links inside of the configured music_directory. +# +#follow_inside_symlinks "yes" +# +############################################################################### + + +# Zeroconf / Avahi Service Discovery ########################################## +# +# If this setting is set to "yes", service information will be published with +# Zeroconf / Avahi. +# +#zeroconf_enabled "yes" +# +# The argument to this setting will be the Zeroconf / Avahi unique name for +# this MPD server on the network. +# +#zeroconf_name "Music Player" +# +############################################################################### + + +# Permissions ################################################################# +# +# If this setting is set, MPD will require password authorization. The password +# setting can be specified multiple times for different password profiles. +# +#password "password@read,add,control,admin" +# +# This setting specifies the permissions a user has who has not yet logged in. +# +#default_permissions "read,add,control,admin" +# +############################################################################### + + +# Database ####################################################################### +# + +#database { +# plugin "proxy" +# host "other.mpd.host" +# port "6600" +#} + +# Input ####################################################################### +# + +input { + plugin "curl" +# proxy "proxy.isp.com:8080" +# proxy_user "user" +# proxy_password "password" +} + +# +############################################################################### + +# Audio Output ################################################################ +# + +audio_output { + type "pulse" + name "pulse audio" +} + +audio_output { + type "fifo" + name "my_fifo" + path "/tmp/mpd.fifo" + format "44100:16:2" +} + +# MPD supports various audio output types, as well as playing through multiple +# audio outputs at the same time, through multiple audio_output settings +# blocks. Setting this block is optional, though the server will only attempt +# autodetection for one sound card. +# +# An example of an ALSA output: +# +#audio_output { +# type "alsa" +# name "My ALSA Device" +## device "hw:0,0" # optional +## mixer_type "hardware" # optional +## mixer_device "default" # optional +## mixer_control "PCM" # optional +## mixer_index "0" # optional +#} +# +# An example of an OSS output: +# +#audio_output { +# type "oss" +# name "My OSS Device" +## device "/dev/dsp" # optional +## mixer_type "hardware" # optional +## mixer_device "/dev/mixer" # optional +## mixer_control "PCM" # optional +#} +# +# An example of a shout output (for streaming to Icecast): +# +#audio_output { +# type "shout" +# encoder "vorbis" # optional +# name "My Shout Stream" +# host "localhost" +# port "8000" +# mount "/mpd.ogg" +# password "hackme" +# quality "5.0" +# bitrate "128" +# format "44100:16:1" +## protocol "icecast2" # optional +## user "source" # optional +## description "My Stream Description" # optional +## url "http://example.com" # optional +## genre "jazz" # optional +## public "no" # optional +## timeout "2" # optional +## mixer_type "software" # optional +#} +# +# An example of a recorder output: +# +#audio_output { +# type "recorder" +# name "My recorder" +# encoder "vorbis" # optional, vorbis or lame +# path "/var/lib/mpd/recorder/mpd.ogg" +## quality "5.0" # do not define if bitrate is defined +# bitrate "128" # do not define if quality is defined +# format "44100:16:1" +#} +# +# An example of a httpd output (built-in HTTP streaming server): +# +#audio_output { +# type "httpd" +# name "My HTTP Stream" +# encoder "vorbis" # optional, vorbis or lame +# port "8000" +# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6 +## quality "5.0" # do not define if bitrate is defined +# bitrate "128" # do not define if quality is defined +# format "44100:16:1" +# max_clients "0" # optional 0=no limit +#} +# +# An example of a pulseaudio output (streaming to a remote pulseaudio server) +# +#audio_output { +# type "pulse" +# name "My Pulse Output" +## server "remote_server" # optional +## sink "remote_server_sink" # optional +#} +# +# An example of a winmm output (Windows multimedia API). +# +#audio_output { +# type "winmm" +# name "My WinMM output" +## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional +# or +## device "0" # optional +## mixer_type "hardware" # optional +#} +# +# An example of an openal output. +# +#audio_output { +# type "openal" +# name "My OpenAL output" +## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional +#} +# +# An example of an sndio output. +# +#audio_output { +# type "sndio" +# name "sndio output" +# mixer_type "software" +#} +# +# An example of an OS X output: +# +#audio_output { +# type "osx" +# name "My OS X Device" +## device "Built-in Output" # optional +## channel_map "-1,-1,0,1" # optional +#} +# +## Example "pipe" output: +# +#audio_output { +# type "pipe" +# name "my pipe" +# command "aplay -f cd 2>/dev/null" +## Or if you're want to use AudioCompress +# command "AudioCompress -m | aplay -f cd 2>/dev/null" +## Or to send raw PCM stream through PCM: +# command "nc example.org 8765" +# format "44100:16:2" +#} +# +## An example of a null output (for no audio output): +# +#audio_output { +# type "null" +# name "My Null Output" +# mixer_type "none" # optional +#} +# +############################################################################### + + +# Normalization automatic volume adjustments ################################## +# +# This setting specifies the type of ReplayGain to use. This setting can have +# the argument "off", "album", "track" or "auto". "auto" is a special mode that +# chooses between "track" and "album" depending on the current state of +# random playback. If random playback is enabled then "track" mode is used. +# See <http://www.replaygain.org> for more details about ReplayGain. +# This setting is off by default. +# +#replaygain "album" +# +# This setting sets the pre-amp used for files that have ReplayGain tags. By +# default this setting is disabled. +# +#replaygain_preamp "0" +# +# This setting sets the pre-amp used for files that do NOT have ReplayGain tags. +# By default this setting is disabled. +# +#replaygain_missing_preamp "0" +# +# This setting enables or disables ReplayGain limiting. +# MPD calculates actual amplification based on the ReplayGain tags +# and replaygain_preamp / replaygain_missing_preamp setting. +# If replaygain_limit is enabled MPD will never amplify audio signal +# above its original level. If replaygain_limit is disabled such amplification +# might occur. By default this setting is enabled. +# +#replaygain_limit "yes" +# +# This setting enables on-the-fly normalization volume adjustment. This will +# result in the volume of all playing audio to be adjusted so the output has +# equal "loudness". This setting is disabled by default. +# +#volume_normalization "no" +# +############################################################################### + +# Character Encoding ########################################################## +# +# If file or directory names do not display correctly for your locale then you +# may need to modify this setting. +# +#filesystem_charset "UTF-8" +# +############################################################################### diff --git a/.config/msmtp/config b/.config/msmtp/config new file mode 100644 index 0000000..cb86e42 --- /dev/null +++ b/.config/msmtp/config @@ -0,0 +1,72 @@ +# Set default values for all following accounts. +defaults +port 587 +tls on +auth on +#tls_trust_file /etc/ssl/certs/ca-certificates.crt +logfile ~/.msmtp.log + +account shemshak +host mail.shemshak.org +# use `msmtp -a shemshak --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint +tls_fingerprint A9:B8:79:CE:47:F7:E8:EB:7B:0D:C5:3E:1E:35:72:A0:03:E3:A2:1A:A9:1C:24:34:6E:F9:9E:78:89:67:11:E3 +tls_starttls on +from amin@shemshak.org +user bandali@shemshak.org +passwordeval gpg --no-tty -q -d ~/.passwd/shemshak.gpg + +account bandali : shemshak +from bandali@shemshak.org +account aminb : shemshak +from amin@aminb.org +account bndl : shemshak +from a@bndl.org + +account gnu +host fencepost.gnu.org +# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint +tls_fingerprint 36:A7:33:D0:57:25:BB:D8:A8:21:7B:A3:91:05:A9:4F:43:4E:87:AE:65:4B:0D:A4:A0:9A:08:89:AE:1F:A5:D7 +tls_starttls on +from bandali@gnu.org +user bandali +passwordeval gpg --no-tty -q -d ~/.passwd/gnu.gpg + +account gnu-mab : gnu +from mab@gnu.org +account gnu-aminb : gnu +from aminb@gnu.org +account gnu-amin : gnu +from amin@gnu.org + +account uwaterloo +host connect.uwaterloo.ca +tls_starttls on +from abandali@uwaterloo.ca +user abandali +passwordeval gpg --no-tty -q -d ~/.passwd/uwaterloo.gpg +tls_trust_file /etc/ssl/certs/ca-certificates.crt + +account uwaterloo-friendly : uwaterloo +from bandali@uwaterloo.ca + +account csclub +host mail.csclub.uwaterloo.ca +tls_starttls on +from abandali@csclub.uwaterloo.ca +user abandali +passwordeval gpg --no-tty -q -d ~/.passwd/csclub.gpg +tls_trust_file /etc/ssl/certs/ca-certificates.crt + +account csclub-friendly : csclub +from bandali@csclub.uwaterloo.ca + +account sfl +host mail.savoirfairelinux.com +tls on +from amin.bandali@savoirfairelinux.com +user amin.bandali +passwordeval gpg --no-tty -q -d ~/.passwd/sfl.gpg +tls_trust_file /etc/ssl/certs/ca-certificates.crt + +# Set a default account +account default : shemshak diff --git a/.config/profiles/chaman b/.config/profiles/chaman new file mode 100644 index 0000000..3b78e7b --- /dev/null +++ b/.config/profiles/chaman @@ -0,0 +1,16 @@ +export IS_GUIX_SYSTEM=true + +if [ -x "$(command -v xinput)" ]; then + xinput --set-prop "TPPS/2 IBM TrackPoint" 'libinput Accel Speed' -0.4 +fi + +setxkbmap \ + -layout us,ir \ + -option ctrl:nocaps \ + -option grp:shifts_toggle + +xmodmap -e "keysym Menu = Super_R" + +xsetroot -cursor_name left_ptr +xset r rate 200 45 +xset b off diff --git a/.config/profiles/darrud b/.config/profiles/darrud new file mode 100644 index 0000000..96cd9f8 --- /dev/null +++ b/.config/profiles/darrud @@ -0,0 +1 @@ +export INFOPATH="$HOME/usr/local/share/info${INFOPATH:+:}$INFOPATH" diff --git a/.config/profiles/langa b/.config/profiles/langa new file mode 100644 index 0000000..764f785 --- /dev/null +++ b/.config/profiles/langa @@ -0,0 +1 @@ +export XDG_DATA_DIRS="/usr/share/mate:/usr/local/share/:/usr/share/" diff --git a/.config/readline/inputrc b/.config/readline/inputrc new file mode 100644 index 0000000..47b9706 --- /dev/null +++ b/.config/readline/inputrc @@ -0,0 +1,16 @@ +set enable-bracketed-paste on + +set colored-stats on +set colored-completion-prefix on +set completion-ignore-case on +set menu-complete-display-prefix on +set page-completions off +set show-all-if-ambiguous on +set show-all-if-unmodified on +set visible-stats on + +TAB: menu-complete +"\e[Z": menu-complete-backward + +"\e[A": history-search-backward +"\e[B": history-search-forward diff --git a/.config/redshift.conf b/.config/redshift.conf new file mode 100644 index 0000000..d574809 --- /dev/null +++ b/.config/redshift.conf @@ -0,0 +1,65 @@ +; Global settings for redshift +[redshift] +; Set the day and night screen temperatures (Neutral is 6500K) +;temp-day=5700 +;temp-night=3500 + +;temp-day=6500 +temp-day=6200 +;temp-night=4800 +;temp-night=5000 +;temp-night=4500 +temp-night=4000 + +; Enable/Disable a smooth transition between day and night +; 0 will cause a direct change from day to night screen temperature. +; 1 will gradually increase or decrease the screen temperature. +transition=1 + +; Set the screen brightness. Default is 1.0. +;brightness=0.9 +; It is also possible to use different settings for day and night +; since version 1.8. +;brightness-day=0.7 +;brightness-night=0.4 +; Set the screen gamma (for all colors, or each color channel +; individually) +;gamma=0.8 +;gamma=1.0 +;gamma=0.8:0.7:0.8 +; This can also be set individually for day and night since +; version 1.10. +;gamma-day=0.8:0.7:0.8 +;gamma-night=0.6 + +; Set the location-provider: 'geoclue2' or 'manual' +; type 'redshift -l list' to see possible values. +; The location provider settings are in a different section. +;location-provider=manual +location-provider=geoclue2 + +; Set the adjustment-method: 'randr', 'vidmode' +; type 'redshift -m list' to see all possible values. +; 'randr' is the preferred method, 'vidmode' is an older API. +; but works in some cases when 'randr' does not. +; The adjustment method settings are in a different section. +adjustment-method=randr + +; Configuration of the location-provider: +; type 'redshift -l PROVIDER:help' to see the settings. +; ex: 'redshift -l manual:help' +; Keep in mind that longitudes west of Greenwich (e.g. the Americas) +; are negative numbers. +;[manual] +;lat=48.1 +;lon=11.6 + +; Configuration of the adjustment-method +; type 'redshift -m METHOD:help' to see the settings. +; ex: 'redshift -m randr:help' +; In this example, randr is configured to adjust screen 1. +; Note that the numbering starts from 0, so this is actually the +; second screen. If this option is not specified, Redshift will try +; to adjust _all_ screens. +;[randr] +;screen=1 diff --git a/.config/rofi-pass/config b/.config/rofi-pass/config new file mode 100644 index 0000000..e369133 --- /dev/null +++ b/.config/rofi-pass/config @@ -0,0 +1,74 @@ +# permanently set alternative root dir +# root=/path/to/root + +# rofi command. Make sure to have "$@" as last argument +_rofi () { + #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@" + rofi -i -no-auto-select -kb-accept-entry "!Return" "$@" +} + +# xdotool needs the keyboard layout to be set using setxkbmap +# You can do this in your autostart scripts (e.g. xinitrc) + +# If for some reason, you cannot do this, you can set the command here. +# and set fix_layout to true +fix_layout=false + +layout_cmd () { + setxkbmap us +} + +# fields to be used +URL_field='url' +USERNAME_field='user' +AUTOTYPE_field='autotype' + +# delay to be used for :delay keyword +delay=2 + +## Programs to be used +# Editor +EDITOR='gvim -f' + +# Browser +BROWSER='chromium' + +## Misc settings + +default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl +auto_enter='false' +notify='false' +default_autotype='user :tab pass' + +# color of the help messages +# leave empty for autodetection +help_color="#4872FF" + +# Clipboard settings +# Possible options: primary, clipboard, both +clip=primary + +# Options for generating new password entries +# default_user is also used for password files that have no user field. +default_user=aminb +default_user2=bandali +password_length=30 + +# Custom Keybindings +#autotype="Alt+1" +autotype="Alt+m" +type_user="Alt+2" +type_pass="Alt+3" +open_url="Alt+4" +copy_name="Alt+u" +copy_url="Alt+l" +copy_pass="Alt+p" +show="Alt+o" +copy_entry="Alt+2" +type_entry="Alt+1" +copy_menu="Alt+c" +action_menu="Alt+a" +type_menu="Alt+t" +help="Alt+h" +switch="Alt+x" +insert_pass="Alt+n" diff --git a/.config/rofi/config b/.config/rofi/config new file mode 100644 index 0000000..a2b343d --- /dev/null +++ b/.config/rofi/config @@ -0,0 +1,14 @@ +! rofi.font: Ubuntu Mono 13 +! rofi.font: Inconsolata 16 +! rofi.font: Iosevka 13 +! rofi.font: Source Code Pro 11 +rofi.font: Source Code Pro 10.5 +rofi.modi: run,window +! rofi.width: 640 +rofi.width: 600 +!rofi.location: 2 +!rofi.yoffset: 200 +rofi.monitor: -1 +!rofi.lines: 10 + +rofi.theme: ~/.guix-profile/share/rofi/themes/gruvbox-light-hard.rasi diff --git a/.config/screen/screenrc b/.config/screen/screenrc new file mode 100644 index 0000000..2830565 --- /dev/null +++ b/.config/screen/screenrc @@ -0,0 +1,2 @@ +startup_message off +caption always "%{= kc}GNU Screen $USER@%H (load: %l)%-28=%{= .m}%D %d.%m.%Y %0c" diff --git a/.config/tridactyl/tridactylrc b/.config/tridactyl/tridactylrc new file mode 100644 index 0000000..a4120e3 --- /dev/null +++ b/.config/tridactyl/tridactylrc @@ -0,0 +1,37 @@ +bind n scrollline 2 +bind p scrollline -2 + +bind 0 scrollto 0 x +bind - scrollto 100 x + +bind P tabprev +bind N tabnext + +bind d scrollpage 0.5 +bind u scrollpage -0.5 +unbind <C-d> +unbind <C-u> + +bind x tabclose +bind X undo +bind <C-S> stop + +bind gd tabduplicate +bind gw tabdetach + +bind O fillcmdline bmarks + +bind ;<Space> fillcmdline_notrail + +unbind <C-f> + +set hintfiltermode vimperator-reflow +set hintnames numeric +set urlparenttrailingslash false + +set browser abrowser +" set newtab https://bandali.eu.org + +seturl warrior.uwaterloo.ca noiframe true + +" autocmd DocStart www.reddit.com js tri.excmds.urlmodify("-t", "www", "old") diff --git a/.config/user-dirs.dirs b/.config/user-dirs.dirs new file mode 100644 index 0000000..6b047f6 --- /dev/null +++ b/.config/user-dirs.dirs @@ -0,0 +1,8 @@ +XDG_DESKTOP_DIR="$HOME/Desktop" +XDG_DOCUMENTS_DIR="$HOME/usr/doc" +XDG_DOWNLOAD_DIR="$HOME/usr/dl" +XDG_MUSIC_DIR="$HOME/usr/music" +XDG_PICTURES_DIR="$HOME/usr/pic" +XDG_PUBLICSHARE_DIR="$HOME/usr/pub" +XDG_TEMPLATES_DIR="$HOME/usr/temp" +XDG_VIDEOS_DIR="$HOME/usr/vid" diff --git a/.config/zathura/zathurarc b/.config/zathura/zathurarc new file mode 100644 index 0000000..2dc7db0 --- /dev/null +++ b/.config/zathura/zathurarc @@ -0,0 +1,18 @@ +set smooth-scroll true +set selection-clipboard clipboard +set zoom-step 05 +set default-bg "#272727" +set statusbar-bg "#272727" +set inputbar-bg "#373737" +set window-title-basename true +set statusbar-home-tilde true + +map <Return> scroll down +map <A-Return> scroll up + +map H jumplist backward +map L jumplist forward + +map [normal] i toggle_index +map [index] i toggle_index +map [index] q toggle_index diff --git a/.gnupg/gpg-agent.conf b/.gnupg/gpg-agent.conf new file mode 100644 index 0000000..ba418db --- /dev/null +++ b/.gnupg/gpg-agent.conf @@ -0,0 +1,9 @@ +default-cache-ttl 43200 +max-cache-ttl 86400 + +default-cache-ttl-ssh 43200 +max-cache-ttl-ssh 86400 + +pinentry-program /home/bandali/.guix-profile/bin/pinentry-emacs +allow-emacs-pinentry +allow-loopback-pinentry diff --git a/.gtkrc-2.0 b/.gtkrc-2.0 new file mode 100644 index 0000000..09aee9e --- /dev/null +++ b/.gtkrc-2.0 @@ -0,0 +1,6 @@ +gtk-theme-name="Xfce" +# gtk-icon-theme-name="elementary Xfce darker" +gtk-font-name="Roboto 10" +# gtk-font-name="Source Code Variable 10" +gtk-menu-images=0 +# gtk-key-theme-name = "Emacs" diff --git a/.local/bin/battery-percentage-time b/.local/bin/battery-percentage-time new file mode 100755 index 0000000..690afa8 --- /dev/null +++ b/.local/bin/battery-percentage-time @@ -0,0 +1,21 @@ +#!/bin/sh +dbus_send() { + label=$1 + dbus-send --print-reply=literal --system \ + --dest=org.freedesktop.UPower \ + /org/freedesktop/UPower/devices/battery_BAT0 \ + org.freedesktop.DBus.Properties.Get \ + string:org.freedesktop.UPower.Device \ + string:"${label}" | awk '{print $3}' +} + +perc=$(dbus_send 'Percentage') +state=$(dbus_send 'State') + +if [ "$state" -eq 2 ]; then # Discharging + secs=$(dbus_send 'TimeToEmpty') +elif [ "$state" -eq 1 ]; then # Charging + secs=$(dbus_send 'TimeToFull') +fi + +printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60)) diff --git a/.local/bin/emcl b/.local/bin/emcl new file mode 100755 index 0000000..b0f2de2 --- /dev/null +++ b/.local/bin/emcl @@ -0,0 +1,2 @@ +#!/bin/sh +exec emacsclient --alternate-editor="" -c "$@" diff --git a/.local/bin/my-i3status b/.local/bin/my-i3status new file mode 100755 index 0000000..2831c15 --- /dev/null +++ b/.local/bin/my-i3status @@ -0,0 +1,70 @@ +#!/usr/bin/env python2 +# -*- coding: utf-8 -*- + +# This script is a simple wrapper which prefixes each i3status line with custom +# information. It is based on: +# https://github.com/i3/i3status/blob/master/contrib/wrapper.py +# +# In ~/.i3status.conf, add the following line: +# output_format = "i3bar" +# in the 'general' section. +# Then, in ~/.config/i3/config or ~/.config/sway/config add: +# status_command i3status | my-i3status.py +# in the 'bar' section. Make sure my-i3status.py is in $PATH. +# +# © 2012 Valentin Haenel <valentin.haenel@gmx.de> +# © 2018 Amin Bandali <bandali@gnu.org> +# +# This program is free software. It comes without any warranty, to the extent +# permitted by applicable law. You can redistribute it and/or modify it under +# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version +# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more +# details. + +import sys +import json +import os + +def get_nosleep(): + """ Return true if ~/.nosleep exists. """ + return os.path.isfile(os.path.expanduser("~/.nosleep")) + +def print_line(message): + """ Non-buffered printing to stdout. """ + sys.stdout.write(message + '\n') + sys.stdout.flush() + +def read_line(): + """ Interrupted respecting reader for stdin. """ + # try reading a line, removing any extra whitespace + try: + line = sys.stdin.readline().strip() + # i3status sends EOF, or an empty line + if not line: + sys.exit(3) + return line + # exit on ctrl-c + except KeyboardInterrupt: + sys.exit() + +if __name__ == '__main__': + # Skip the first line which contains the version header. + print_line(read_line()) + + # The second line contains the start of the infinite array. + print_line(read_line()) + + while True: + line, prefix = read_line(), '' + # ignore comma at start of lines + if line.startswith(','): + line, prefix = line[1:], ',' + + if get_nosleep(): + j = json.loads(line) + # insert information into the start of the json, but could be anywhere + j.insert(0, {'full_text' : '•', 'name' : 'nosleep'}) + # and echo back new encoded json + print_line(prefix+json.dumps(j)) + else: + print_line(prefix+line) diff --git a/.local/bin/rofi-light b/.local/bin/rofi-light new file mode 100755 index 0000000..f43543b --- /dev/null +++ b/.local/bin/rofi-light @@ -0,0 +1,4 @@ +#!/bin/sh +cur=$(light -G) +val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12) +[ -n "$val" ] && light -S "$val" diff --git a/.local/bin/rofi-remmina b/.local/bin/rofi-remmina new file mode 100755 index 0000000..09b0e64 --- /dev/null +++ b/.local/bin/rofi-remmina @@ -0,0 +1,30 @@ +#!/usr/bin/env python2 +import ConfigParser +import os +from subprocess import Popen, PIPE + +remmina_dir = os.path.expanduser("~/.local/share/remmina") + +fdict = dict() + +for f in os.listdir(remmina_dir): + fp = os.path.join(remmina_dir, f) + c = ConfigParser.ConfigParser() + c.read(fp) + n = c.get('remmina', 'name') + fdict[n] = fp + +lines = max(min(15, len(fdict)), 1); +width = len(max(fdict.keys(), key=len)) +rofi = Popen(["rofi", "-i", "-dmenu", \ + "-l", str(lines), "-width", str(width), \ + "-p", "connection"], stdout=PIPE, stdin=PIPE) +selected = rofi.communicate("\n" \ + .join(fdict.keys()) \ + .encode("utf-8"))[0] \ + .decode("utf-8") \ + .strip() +rofi.wait() + +r = Popen(["remmina", "-c", fdict[selected]]) +r.wait() diff --git a/.local/bin/toggle-presentation-mode b/.local/bin/toggle-presentation-mode new file mode 100755 index 0000000..e939d8c --- /dev/null +++ b/.local/bin/toggle-presentation-mode @@ -0,0 +1,2 @@ +#!/bin/sh +xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T diff --git a/.local/bin/toggle-tablet b/.local/bin/toggle-tablet new file mode 100755 index 0000000..c79a4f4 --- /dev/null +++ b/.local/bin/toggle-tablet @@ -0,0 +1,31 @@ +#!/bin/sh +# This script toggles between a 'normal' mode and a 'tablet' mode, doing +# a few things: + +# - rotates the screen using =xrandr=, so that rotating the physical +# display of my X220t would have the laptop's battery on the right +# hand side, +# - enables touch screen, +# - properly rotates the stylus pen and touch screen pointers, and +# - toggles between RGB and Vertical BGR sub-pixel order. + +case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in + 0) # Screen is not rotated, we should rotate it right (90°) + xrandr -o 3 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1 + xfconf-query -c xsettings -p /Xft/RGBA -s vbgr + ;; + 1) # Currently top is rotated right, we should set it normal (0°) + xrandr -o 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0 + xfconf-query -c xsettings -p /Xft/RGBA -s rgb + ;; + *) + echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2 + exit 1 + ;; +esac diff --git a/.local/bin/volume-info b/.local/bin/volume-info new file mode 100755 index 0000000..b9a8488 --- /dev/null +++ b/.local/bin/volume-info @@ -0,0 +1,8 @@ +#!/bin/sh +cur_vol=$(pamixer --get-volume) + +if [ $(pamixer --get-mute) = true ]; then + printf 'mt \n' "$cur_vol" +else + printf '%02d \n' "$cur_vol" +fi diff --git a/.local/bin/zathura-sync b/.local/bin/zathura-sync new file mode 100755 index 0000000..89dc620 --- /dev/null +++ b/.local/bin/zathura-sync @@ -0,0 +1,7 @@ +#!/bin/sh +pos="$1" +pdffile="$2" +zathura --synctex-forward "$pos" "$pdffile" || \ + ( + zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" & + sleep 1; zathura --synctex-forward "$pos" "$pdffile" ) diff --git a/.profile b/.profile new file mode 100644 index 0000000..6bcab82 --- /dev/null +++ b/.profile @@ -0,0 +1,98 @@ +# ~/.profile: executed by the command interpreter for login shells. +# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login +# exists. + +# source host-specific profile +if [ -f "$HOME/.config/profiles/$(hostname)" ]; then + . "$HOME/.config/profiles/$(hostname)" +fi + +export EDITOR="emacsclient -nw" +export VISUAL="emcl" + +PATH="$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH" +if [ -z "$IS_GUIX_SYSTEM" ]; then + PATH="$HOME/.config/guix/current/bin${PATH:+:}$PATH" + INFOPATH="$HOME/.config/guix/current/share/info${INFOPATH:+:}$INFOPATH" + export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale" +fi +export PATH +export INFOPATH + +export MY_GUIX_MANIFESTS="$HOME/.config/guix/manifest" +export MY_GUIX_PROFILES="$HOME/.config/guix/profile" + +export XDG_CONFIG_HOME="$HOME/.config" +export XDG_DATA_HOME="$HOME/.local/share" + +if [ -f "$HOME/.config/user-dirs.dirs" ]; then + set -a + . "$HOME/.config/user-dirs.dirs" + set +a +fi + +export INPUTRC="$XDG_CONFIG_HOME"/readline/inputrc +export SCREENRC="$XDG_CONFIG_HOME"/screen/screenrc + +export MAILDIR="$HOME/mail" +export CVS_RSH="ssh" + +if [ -x "$(command -v go)" ]; then + export GOPATH="$HOME/src/go" + export PATH="$GOPATH/bin:$PATH" +fi + +# if running bash +if [ -n "$BASH_VERSION" ]; then + # include .bashrc if it exists + if [ -f "$HOME/.bashrc" ]; then + . "$HOME/.bashrc" + fi +fi + +if [ -z "$IS_GUIX_SYSTEM" ]; then + # if guix is installed + if [ -x "$(command -v guix)" ]; then + SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs" + if [ -d "$SSL_CERT_DIR" -o -h "$SSL_CERT_DIR" ]; then + export SSL_CERT_DIR + export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt" + else + printf "it seems you forgot to \`guix install nss-certs\'\n" + fi + GUIX_PROFILE="$HOME/.guix-profile" + . "$GUIX_PROFILE/etc/profile" + unset XDG_DATA_DIRS + fi +fi + +for p in $MY_GUIX_PROFILES/*; do + profile=$p/$(basename "$p") + if [ -f "$profile"/etc/profile ]; then + GUIX_PROFILE="$profile" + . "$GUIX_PROFILE"/etc/profile + fi + unset profile +done + +export PATH="$HOME/usr/local/bin:$HOME/.local/bin:$PATH" + +# start an ssh-agent (with guix's openssh) +if [ -z "$IS_GUIX_SYSTEM" ]; then + if ! pgrep -u "$USER" ssh-agent > /dev/null; then + ssh-agent > ~/.ssh-agent-thing + fi + if [[ ! "$SSH_AUTH_SOCK" ]]; then + eval "$(<~/.ssh-agent-thing)" + fi +fi + +# footenote: when on a foreign distro and using Xfce, don't forget to +# disable its auto-start of gpg- and ssh-agent, by issuing +# xfconf-query -c xfce4-session -p /startup/ssh-agent/enabled -n -t bool -s false +# xfconf-query -c xfce4-session -p /startup/gpg-agent/enabled -n -t bool -s false +# see https://docs.xfce.org/xfce/xfce4-session/advanced#ssh_and_gpg_agents +# also, MATE does something similar with gnome-keyring-daemon: +# http://william.shallum.net/random-notes/disabling-gnome-keyring-daemon-ssh-agent-on-mate-desktop + +export PATH="$HOME/.cargo/bin:$PATH" diff --git a/.signature b/.signature new file mode 100644 index 0000000..c349ea0 --- /dev/null +++ b/.signature @@ -0,0 +1,3 @@ +https://bndl.org +Free Software activist | GNU maintainer & webmaster +GPG: BE62 7373 8E61 6D6D 1B3A 08E8 A21A 0202 4881 6103 diff --git a/.xinitrc b/.xinitrc new file mode 100644 index 0000000..c2feb42 --- /dev/null +++ b/.xinitrc @@ -0,0 +1 @@ +[ -f ~/.Xresources ] && xrdb -merge ~/.Xresources diff --git a/.xsession b/.xsession new file mode 100755 index 0000000..158dcf4 --- /dev/null +++ b/.xsession @@ -0,0 +1,11 @@ +if [ -f "$HOME/.xinitrc" ]; then + . "$HOME/.xinitrc" +fi + +[ -f "/usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd" ] && /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd & +[ -x "$(command -v light-locker)" ] && light-locker --lock-on-suspend & +[ -x "$(command -v pasystray)" ] && pasystray -a & +[ -x "$(command -v nm-applet)" ] && nm-applet & +[ -x "$(command -v compton)" ] && compton & +[ -x "$(command -v dunst)" ] && dunst & +[ -x "$(command -v emacs)" ] && exec ssh-agent exwm -ib 0 diff --git a/.xsessionrc b/.xsessionrc new file mode 100644 index 0000000..61cb5cf --- /dev/null +++ b/.xsessionrc @@ -0,0 +1 @@ +if [ -f "$HOME/.profile" ]; then . "$HOME/.profile"; fi @@ -1,1680 +1,10 @@ #+title: rc.org #+property: header-args :comments no :mkdirp yes :results silent -* About - -This org file contains the configuration files of pretty much every -program I use. The files are tangled (i.e. exported, or derived) from -this file using =org-babel=. - -Note: This file is best viewed inside Emacs with org mode. - -* Configs - -This section contains the configuration files (dotfiles) of various -programs I use besides GNU Emacs. - -** Fontconfig -:PROPERTIES: -:header-args+: :tangle ~/.config/fontconfig/fonts.conf -:END: - -#+begin_src xml -<?xml version="1.0"?> -<!DOCTYPE fontconfig SYSTEM "fonts.dtd"> -<fontconfig> - <match target="font"> - <edit mode="assign" name="rgba"> - <const>rgb</const> - </edit> - </match> - <match target="font"> - <edit mode="assign" name="hinting"> - <bool>true</bool> - </edit> - </match> - <match target="font"> - <edit mode="assign" name="hintstyle"> - <const>hintslight</const> - </edit> - </match> - <match target="font"> - <edit mode="assign" name="antialias"> - <bool>true</bool> - </edit> - </match> - <match target="font"> - <edit mode="assign" name="lcdfilter"> - <const>lcddefault</const> - </edit> - </match> - <dir>~/.fonts</dir> - - <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) --> - <alias binding="same"> - <family>Helvetica</family> - <prefer> - <family>Liberation Sans</family> - </prefer> -</alias> -</fontconfig> -#+end_src - -** getmail -:PROPERTIES: -:header-args+: :tangle ~/.config/getmail/getmailrc -:END: - -#+begin_src conf -[retriever] -type = SimplePOP3SSLRetriever -server = fencepost.gnu.org -username = bandali -password_command = ("gpg", "--no-tty", "-q", "-d", "/home/bandali/.passwd/gnu.gpg") -port = 995 -use_apop = True - -[destination] -type = Maildir -path = ~/mail/gnu.local/bandali/mail/ - -# [destination] -# type = MDA_external -# path = /usr/lib/dovecot/deliver -# arguments = ('-e', '-f', '%(sender)', '-d', 'bandali@gnu.local') - -[options] -read_all = false -delete_after = 1 -# delete = true -received = false -delivered_to = false -#+end_src - -** Git - -*** config -:PROPERTIES: -:header-args+: :tangle ~/.config/git/config -:END: - -#+begin_src conf -[user] - name = Amin Bandali - email = bandali@gnu.org - signingkey = BE6273738E616D6D1B3A08E8A21A020248816103 - -[commit] - gpgsign = true - -# [format] -# signoff = true - -[core] - autocrlf = input # CRLF -> LF on commit - editor = emacsclient -t - pager = "less" - -[mailmap] - file = ~/.config/git/mailmap - -[alias] - git = !exec git # handle nested git calls, e.g. git git status - aliases = config --get-regexp '^alias\\.' - a = add - s = status - sl = status --long - c = checkout - cb = checkout -b - b = branch - r = rebase - p = pull - pr = pull --rebase - ps = push - psf = push --force - nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f" - nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f" - -[color] - ui = auto -[color "status"] - added = green bold - changed = red bold - untracked = red bold -[color "branch"] - current = green bold - remote = magenta bold -[color "diff"] - new = green bold - old = red bold - -# [status] -# # showUntrackedFiles = all -# short=true -# branch=true - -[github] - user = notbandali - -[sendemail] - smtpuser = bandali - smtpserver = fencepost.gnu.org - smtpserverport = 587 - smtpencryption = tls - annotate = yes - -[transfer] - fsckObjects = true -#+end_src - -*** ignore -:PROPERTIES: -:header-args+: :tangle ~/.config/git/ignore -:END: - -#+begin_src conf -*.orig -*.py[co] -*.sublime-workspace -*~ -.DS_Store -*.elc -*-autoloads.el -TAGS -#+end_src - -*** mailmap -:PROPERTIES: -:header-args+: :tangle ~/.config/git/mailmap -:END: - -#+begin_src conf -<bandali@gnu.org> <mab@gnu.org> -<bandali@gnu.org> <amin@gnu.org> -<bandali@gnu.org> <aminb@gnu.org> -<bandali@gnu.org> <amin@aminb.org> -<bandali@gnu.org> <me@aminb.org> -#+end_src - -** GnuPG -:PROPERTIES: -:header-args+: :tangle ~/.gnupg/gpg-agent.conf -:END: - -#+begin_src conf -default-cache-ttl 43200 -max-cache-ttl 86400 - -default-cache-ttl-ssh 43200 -max-cache-ttl-ssh 86400 - -pinentry-program /home/bandali/.guix-profile/bin/pinentry-emacs -allow-emacs-pinentry -allow-loopback-pinentry -#+end_src - -** GTK - -*** GTK+ 2 -:PROPERTIES: -:header-args+: :tangle ~/.gtkrc-2.0 -:END: - -#+begin_src conf -gtk-theme-name="Xfce" -# gtk-icon-theme-name="elementary Xfce darker" -gtk-font-name="Roboto 10" -# gtk-font-name="Source Code Variable 10" -gtk-menu-images=0 -# gtk-key-theme-name = "Emacs" -#+end_src - -*** GTK+ 3 -:PROPERTIES: -:header-args+: :tangle ~/.config/gtk-3.0/settings.ini -:END: - -#+begin_src conf -[Settings] -gtk-icon-theme-name = Adwaita -# gtk-theme-name = Adwaita - -gtk-theme-name = Xfce -# gtk-theme-name = Arc-Darker -# gtk-theme-name = Numix-ArchBlue - -gtk-font-name = Roboto 10 -# gtk-font-name = Source Code Variable Medium 10 -# gtk-key-theme-name = Emacs -#+end_src - -** Guix - -*** Channels -:PROPERTIES: -:header-args+: :tangle ~/.config/guix/channels.scm -:END: - -#+begin_src scheme -(list (channel - (name 'guix) ; https://git.savannah.gnu.org/git/guix.git - (url "file:///home/bandali/src/git/guix")) - (channel - (name 'guix-bandali) ; https://git.sr.ht/~bandali/guix-bandali - (url "file:///home/bandali/src/git/guix-bandali"))) -#+end_src - -*** Profile manifests - -To install/update the packages of the default profile, use -#+begin_example -guix package -m $MY_GUIX_MANIFESTS/main.scm -#+end_example -and for other profiles, use -#+begin_example -guix package -m $MY_GUIX_MANIFESTS/name.scm -p $MY_GUIX_PROFILES/name/name -#+end_example -where =name= is the name of the profile (e.g. =doc=, =media=, ...). - -**** doc -:PROPERTIES: -:header-args+: :tangle ~/.config/guix/manifest/doc.scm -:END: - -#+begin_src scheme -(specifications->manifest - '("libreoffice" - "texlive-amsfonts" - "texlive-base" - "texlive-latex-listings" - ;; "texlive-palatino" - "texlive-xcolor" -)) -#+end_src - -**** main -:PROPERTIES: -:header-args+: :tangle ~/.config/guix/manifest/main.scm -:END: - -#+begin_src scheme -(specifications->manifest - '("alsa-utils" - "bash-completion" - "cpufrequtils" - "cpupower" - "cvs" - "dunst" - "emacs" - "emacs-alert" - "emacs-amx" - "emacs-async" - "emacs-biblio-git" - "emacs-boxquote" - "emacs-company" - "emacs-company-ebdb" - "emacs-crux" - "emacs-dash" - "emacs-debbugs" - "emacs-diff-hl" - "emacs-dmenu" - "emacs-doom-themes" - "emacs-ebdb" - "emacs-emmet-mode" - ;; "emacs-emojify" - "emacs-erc-hl-nicks" - "emacs-erc-scrolltoplace" - "emacs-eshell-up" - "emacs-exec-path-from-shell" - "emacs-expand-region" - "emacs-exwm" - "emacs-exwm-edit" - "emacs-flycheck" - "emacs-geiser" - ;; "emacs-gnus-harvest" - "emacs-guix" - "emacs-helpful" - "emacs-hl-todo" - "emacs-ivy" - "emacs-magit" - "emacs-message-x" - "emacs-minions" - ;; "emacs-multi-term" - "emacs-multiple-cursors" - "emacs-mwim" - ;; "emacs-next" - ;; "emacs-next-delight" - "emacs-no-littering" - "emacs-org" - "emacs-org-contrib" - "emacs-org-ref" - "emacs-orgalist" - "emacs-page-break-lines" - "emacs-pass" - "emacs-pinentry" - "emacs-projectile" - "emacs-shrink-path-git" - "emacs-smart-mode-line" - "emacs-typo" - "emacs-unkillable-scratch" - "emacs-use-package" - "emacs-web-mode" - "emacs-which-key" - "emacs-yasnippet" - "emacs-znc-git" - "font-adobe-source-code-pro" - "font-gnu-freefont-ttf" - "font-google-roboto" - "font-liberation" - "font-linuxlibertine" - "font-sil-gentium" - "font-tex-gyre" - ;; "font-ubuntu" - "font-vazir" - "getmail" - "gettext" - "git" - "git:send-email" - "gnupg" - "guile" - "haunt" - "htop" - "hunspell" - "hunspell-dict-en-ca" - "hunspell-dict-en-us" - "isync" - "light" - "msmtp" - "ncdu" - "notmuch" - "openjdk" - "openssh" - "openssl" - "pass-otp" - "password-store" - "pasystray" - "pinentry-emacs" - "poppler" ; for 'pdffonts' - "rofi" - "rofi-pass" - "rsync" - "rxvt-unicode" - "screen" - "scrot" - "setxkbmap" - "strace" - "thinkfan" - "unzip" - "wget" - "xdg-user-dirs" - ;; "xkbcomp" - "xmodmap" - "xrdb" - "xset" - "xsetroot")) -#+end_src - -**** media -:PROPERTIES: -:header-args+: :tangle ~/.config/guix/manifest/media.scm -:END: - -#+begin_src scheme -(specifications->manifest - '("audacity" - "gimp" - "inkscape" - "mpv" - "youtube-dl")) -#+end_src - -**** web -:PROPERTIES: -:header-args+: :tangle ~/.config/guix/manifest/web.scm -:END: - -#+begin_src scheme -(specifications->manifest - '("icecat" - "rtv")) -#+end_src - -*** Systems - -**** chaman -:PROPERTIES: -:header-args+: :tangle ~/.config/guix/system/chaman.scm -:END: - -#+begin_src scheme -(use-modules (gnu) - (gnu packages certs) ; for nss-certs - (gnu packages emacs-xyz) ; for exwm - (gnu packages linux)) ; for powertop -(use-service-modules admin desktop mail networking pm ssh xorg) - -(operating-system - (host-name "chaman") - (locale "en_CA.utf8") - (timezone "Canada/Eastern") - (keyboard-layout - (keyboard-layout "us" "basic")) - (bootloader - (bootloader-configuration - (bootloader grub-bootloader) - (target "/dev/sda") - (keyboard-layout keyboard-layout))) - (mapped-devices - (list (mapped-device - (source - (uuid "283da85e-2c84-47e6-a8ca-20f4e8efb806")) - (target "groot") - (type luks-device-mapping)) - (mapped-device - (source - (uuid "017ddebc-c2c3-4a0a-bda4-d47ec0bc67f0")) - (target "data") - (type luks-device-mapping)))) - (file-systems - (cons* (file-system - (mount-point "/") - (device "/dev/mapper/groot") - (type "ext4") - (dependencies mapped-devices)) - (file-system - (mount-point "/data") - (device "/dev/mapper/data") - (type "ext4") - (dependencies mapped-devices)) - %base-file-systems)) - (users - (cons* (user-account - (name "bandali") - (group "users") - (home-directory "/home/bandali") - (supplementary-groups - '("wheel" "netdev" "audio" "video"))) - %base-user-accounts)) - (packages - (cons* nss-certs - emacs-exwm - %base-packages)) - (services - (cons* - (service xfce-desktop-service-type) - (set-xorg-configuration - (xorg-configuration - (keyboard-layout keyboard-layout))) - (dovecot-service - #:config - (dovecot-configuration - ;; (log-path "/dev/stderr") - (protocols (list (protocol-configuration - (name "imap")))) - (ssl? "no") - (listen '("127.0.0.1")) - (disable-plaintext-auth? #f) - (auth-mechanisms '("plain")) - (postmaster-address "bandali@gnu.local") - (mail-location "maildir:/home/bandali/mail/%d/%n/mail") - (userdbs (list (userdb-configuration - (driver "static") - (args (list "uid=bandali" "gid=users" "home=/home/bandali/mail/%d/%n"))))) - (passdbs (list (passdb-configuration - (driver "passwd-file") - (args (list "/data/dovecot-passwd"))))))) - (service rottlog-service-type) - (service thermald-service-type) - (service tlp-service-type - (tlp-configuration - (cpu-boost-on-ac? #t) - (sound-power-save-on-bat 0) - (sound-power-save-controller? #f) - ;; (usb-blacklist "0e8f:00a8") ;for some reason doesn't seem to work - (usb-autosuspend? #f))) - (simple-service 'my-powertop-auto-tune activation-service-type - #~(zero? (system* #$(file-append powertop "/sbin/powertop") - "--auto-tune"))) - (simple-service 'light-udev-rules udev-service-type (list light)) - %desktop-services))) -#+end_src - -** isync -:PROPERTIES: -:header-args+: :tangle ~/.config/isync/mbsyncrc -:END: - -#+begin_src conf -# Global defaults -CopyArrivalDate yes -Create Both -Expunge Both - -###### -IMAPAccount shemshak -Host mail.shemshak.org -User bandali@shemshak.org -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/shemshak.gpg" -SSLType IMAPS - -IMAPStore shemshak-remote -Account shemshak - -IMAPAccount shemshak-local -Host 127.0.0.1 -Port 143 -User bandali@shemshak.local -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/shemshak-local.gpg" -SSLType None - -IMAPStore shemshak-local -Account shemshak-local - -Channel shemshak -Master :shemshak-remote: -Slave :shemshak-local: -Patterns * - -###### -IMAPAccount gnub -Host mail.shemshak.org -User gnu@bndl.org -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/gnub.gpg" -SSLType IMAPS - -IMAPStore gnub-remote -Account gnub - -IMAPAccount gnub-local -Host 127.0.0.1 -Port 143 -User bandali@gnu.local -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/gnub-local.gpg" -SSLType None - -IMAPStore gnub-local -Account gnub-local - -Channel gnub -Master :gnub-remote: -Slave :gnub-local: -Patterns * - -###### -IMAPAccount uwaterloo -Host connect.uwaterloo.ca -User abandali -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg" -SSLType IMAPS - -IMAPStore uwaterloo-remote -Account uwaterloo - -IMAPAccount uwaterloo-local -Host 127.0.0.1 -Port 143 -User abandali@uwaterloo.local -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-local.gpg" -SSLType None - -IMAPStore uwaterloo-local -Account uwaterloo-local - -Channel uwaterloo -Master :uwaterloo-remote: -Slave :uwaterloo-local: -Patterns * - -###### -IMAPAccount csclub -Host mail.csclub.uwaterloo.ca -User abandali -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub.gpg" -SSLType IMAPS - -IMAPStore csclub-remote -Account csclub - -IMAPAccount csclub-local -Host 127.0.0.1 -Port 143 -User abandali@csclub.uwaterloo.local -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-local.gpg" -SSLType None - -IMAPStore csclub-local -Account csclub-local - -Channel csclub -Master :csclub-remote: -Slave :csclub-local: -Patterns * -#+end_src - -** Latexmk -:PROPERTIES: -:header-args+: :tangle ~/.config/latexmk/latexmkrc -:END: - -#+begin_src conf -$pdf_previewer = "start zathura %O %S"; -$clean_ext = "aux out"; - -# $pdf_update_method = 4; -# $pdf_update_command = "zathura %O %S"; - -# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs -# by Ctrl+click in the PDF. -# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex -# editor. -# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S'; -#+end_src - -** mpd -:PROPERTIES: -:header-args+: :tangle ~/.config/mpd/mpd.conf -:END: - -#+begin_src conf -# An example configuration file for MPD. -# Read the user manual for documentation: http://www.musicpd.org/doc/user/ - - -# Files and directories ####################################################### -# -# This setting controls the top directory which MPD will search to discover the -# available audio files and add them to the daemon's online database. This -# setting defaults to the XDG directory, otherwise the music directory will be -# be disabled and audio files will only be accepted over ipc socket (using -# file:// protocol) or streaming files over an accepted protocol. -# -music_directory "~/usr/music" -# -# This setting sets the MPD internal playlist directory. The purpose of this -# directory is storage for playlists created by MPD. The server will use -# playlist files not created by the server but only if they are in the MPD -# format. This setting defaults to playlist saving being disabled. -# -playlist_directory "~/.mpd/playlists" -# -# This setting sets the location of the MPD database. This file is used to -# load the database at server start up and store the database while the -# server is not up. This setting defaults to disabled which will allow -# MPD to accept files over ipc socket (using file:// protocol) or streaming -# files over an accepted protocol. -# -db_file "~/.mpd/database" -# -# These settings are the locations for the daemon log files for the daemon. -# These logs are great for troubleshooting, depending on your log_level -# settings. -# -# The special value "syslog" makes MPD use the local syslog daemon. This -# setting defaults to logging to syslog, otherwise logging is disabled. -# -log_file "~/.mpd/log" -# -# This setting sets the location of the file which stores the process ID -# for use of mpd --kill and some init scripts. This setting is disabled by -# default and the pid file will not be stored. -# -pid_file "~/.mpd/pid" -# -# This setting sets the location of the file which contains information about -# most variables to get MPD back into the same general shape it was in before -# it was brought down. This setting is disabled by default and the server -# state will be reset on server start up. -# -state_file "~/.mpd/state" -# -# The location of the sticker database. This is a database which -# manages dynamic information attached to songs. -# -sticker_file "~/.mpd/sticker.sql" -# -############################################################################### - - -# General music daemon options ################################################ -# -# This setting specifies the user that MPD will run as. MPD should never run as -# root and you may use this setting to make MPD change its user ID after -# initialization. This setting is disabled by default and MPD is run as the -# current user. -# -#user "nobody" -# -# This setting specifies the group that MPD will run as. If not specified -# primary group of user specified with "user" setting will be used (if set). -# This is useful if MPD needs to be a member of group such as "audio" to -# have permission to use sound card. -# -#group "nogroup" -# -# This setting sets the address for the daemon to listen on. Careful attention -# should be paid if this is assigned to anything other then the default, any. -# This setting can deny access to control of the daemon. Not effective if -# systemd socket activiation is in use. -# -# For network -#bind_to_address "any" -# -# And for Unix Socket -#bind_to_address "~/.mpd/socket" -# -# This setting is the TCP port that is desired for the daemon to get assigned -# to. -# -#port "6600" -# -# This setting controls the type of information which is logged. Available -# setting arguments are "default", "secure" or "verbose". The "verbose" setting -# argument is recommended for troubleshooting, though can quickly stretch -# available resources on limited hardware storage. -# -#log_level "default" -# -# If you have a problem with your MP3s ending abruptly it is recommended that -# you set this argument to "no" to attempt to fix the problem. If this solves -# the problem, it is highly recommended to fix the MP3 files with vbrfix -# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which -# point gapless MP3 playback can be enabled. -# -#gapless_mp3_playback "yes" -# -# Setting "restore_paused" to "yes" puts MPD into pause mode instead -# of starting playback after startup. -# -#restore_paused "no" -# -# This setting enables MPD to create playlists in a format usable by other -# music players. -# -#save_absolute_paths_in_playlists "no" -# -# This setting defines a list of tag types that will be extracted during the -# audio file discovery process. The complete list of possible values can be -# found in the user manual. -#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc" -# -# This setting enables automatic update of MPD's database when files in -# music_directory are changed. -# -#auto_update "yes" -# -# Limit the depth of the directories being watched, 0 means only watch -# the music directory itself. There is no limit by default. -# -#auto_update_depth "3" -# -############################################################################### - - -# Symbolic link behavior ###################################################### -# -# If this setting is set to "yes", MPD will discover audio files by following -# symbolic links outside of the configured music_directory. -# -#follow_outside_symlinks "yes" -# -# If this setting is set to "yes", MPD will discover audio files by following -# symbolic links inside of the configured music_directory. -# -#follow_inside_symlinks "yes" -# -############################################################################### - - -# Zeroconf / Avahi Service Discovery ########################################## -# -# If this setting is set to "yes", service information will be published with -# Zeroconf / Avahi. -# -#zeroconf_enabled "yes" -# -# The argument to this setting will be the Zeroconf / Avahi unique name for -# this MPD server on the network. -# -#zeroconf_name "Music Player" -# -############################################################################### - - -# Permissions ################################################################# -# -# If this setting is set, MPD will require password authorization. The password -# setting can be specified multiple times for different password profiles. -# -#password "password@read,add,control,admin" -# -# This setting specifies the permissions a user has who has not yet logged in. -# -#default_permissions "read,add,control,admin" -# -############################################################################### - - -# Database ####################################################################### -# - -#database { -# plugin "proxy" -# host "other.mpd.host" -# port "6600" -#} - -# Input ####################################################################### -# - -input { - plugin "curl" -# proxy "proxy.isp.com:8080" -# proxy_user "user" -# proxy_password "password" -} - -# -############################################################################### - -# Audio Output ################################################################ -# - -audio_output { - type "pulse" - name "pulse audio" -} - -audio_output { - type "fifo" - name "my_fifo" - path "/tmp/mpd.fifo" - format "44100:16:2" -} - -# MPD supports various audio output types, as well as playing through multiple -# audio outputs at the same time, through multiple audio_output settings -# blocks. Setting this block is optional, though the server will only attempt -# autodetection for one sound card. -# -# An example of an ALSA output: -# -#audio_output { -# type "alsa" -# name "My ALSA Device" -## device "hw:0,0" # optional -## mixer_type "hardware" # optional -## mixer_device "default" # optional -## mixer_control "PCM" # optional -## mixer_index "0" # optional -#} -# -# An example of an OSS output: -# -#audio_output { -# type "oss" -# name "My OSS Device" -## device "/dev/dsp" # optional -## mixer_type "hardware" # optional -## mixer_device "/dev/mixer" # optional -## mixer_control "PCM" # optional -#} -# -# An example of a shout output (for streaming to Icecast): -# -#audio_output { -# type "shout" -# encoder "vorbis" # optional -# name "My Shout Stream" -# host "localhost" -# port "8000" -# mount "/mpd.ogg" -# password "hackme" -# quality "5.0" -# bitrate "128" -# format "44100:16:1" -## protocol "icecast2" # optional -## user "source" # optional -## description "My Stream Description" # optional -## url "http://example.com" # optional -## genre "jazz" # optional -## public "no" # optional -## timeout "2" # optional -## mixer_type "software" # optional -#} -# -# An example of a recorder output: -# -#audio_output { -# type "recorder" -# name "My recorder" -# encoder "vorbis" # optional, vorbis or lame -# path "/var/lib/mpd/recorder/mpd.ogg" -## quality "5.0" # do not define if bitrate is defined -# bitrate "128" # do not define if quality is defined -# format "44100:16:1" -#} -# -# An example of a httpd output (built-in HTTP streaming server): -# -#audio_output { -# type "httpd" -# name "My HTTP Stream" -# encoder "vorbis" # optional, vorbis or lame -# port "8000" -# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6 -## quality "5.0" # do not define if bitrate is defined -# bitrate "128" # do not define if quality is defined -# format "44100:16:1" -# max_clients "0" # optional 0=no limit -#} -# -# An example of a pulseaudio output (streaming to a remote pulseaudio server) -# -#audio_output { -# type "pulse" -# name "My Pulse Output" -## server "remote_server" # optional -## sink "remote_server_sink" # optional -#} -# -# An example of a winmm output (Windows multimedia API). -# -#audio_output { -# type "winmm" -# name "My WinMM output" -## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional -# or -## device "0" # optional -## mixer_type "hardware" # optional -#} -# -# An example of an openal output. -# -#audio_output { -# type "openal" -# name "My OpenAL output" -## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional -#} -# -# An example of an sndio output. -# -#audio_output { -# type "sndio" -# name "sndio output" -# mixer_type "software" -#} -# -# An example of an OS X output: -# -#audio_output { -# type "osx" -# name "My OS X Device" -## device "Built-in Output" # optional -## channel_map "-1,-1,0,1" # optional -#} -# -## Example "pipe" output: -# -#audio_output { -# type "pipe" -# name "my pipe" -# command "aplay -f cd 2>/dev/null" -## Or if you're want to use AudioCompress -# command "AudioCompress -m | aplay -f cd 2>/dev/null" -## Or to send raw PCM stream through PCM: -# command "nc example.org 8765" -# format "44100:16:2" -#} -# -## An example of a null output (for no audio output): -# -#audio_output { -# type "null" -# name "My Null Output" -# mixer_type "none" # optional -#} -# -############################################################################### - - -# Normalization automatic volume adjustments ################################## -# -# This setting specifies the type of ReplayGain to use. This setting can have -# the argument "off", "album", "track" or "auto". "auto" is a special mode that -# chooses between "track" and "album" depending on the current state of -# random playback. If random playback is enabled then "track" mode is used. -# See <http://www.replaygain.org> for more details about ReplayGain. -# This setting is off by default. -# -#replaygain "album" -# -# This setting sets the pre-amp used for files that have ReplayGain tags. By -# default this setting is disabled. -# -#replaygain_preamp "0" -# -# This setting sets the pre-amp used for files that do NOT have ReplayGain tags. -# By default this setting is disabled. -# -#replaygain_missing_preamp "0" -# -# This setting enables or disables ReplayGain limiting. -# MPD calculates actual amplification based on the ReplayGain tags -# and replaygain_preamp / replaygain_missing_preamp setting. -# If replaygain_limit is enabled MPD will never amplify audio signal -# above its original level. If replaygain_limit is disabled such amplification -# might occur. By default this setting is enabled. -# -#replaygain_limit "yes" -# -# This setting enables on-the-fly normalization volume adjustment. This will -# result in the volume of all playing audio to be adjusted so the output has -# equal "loudness". This setting is disabled by default. -# -#volume_normalization "no" -# -############################################################################### - -# Character Encoding ########################################################## -# -# If file or directory names do not display correctly for your locale then you -# may need to modify this setting. -# -#filesystem_charset "UTF-8" -# -############################################################################### -#+end_src - -** msmtp -:PROPERTIES: -:header-args+: :tangle ~/.config/msmtp/config -:END: - -#+begin_src conf -# Set default values for all following accounts. -defaults -port 587 -tls on -auth on -#tls_trust_file /etc/ssl/certs/ca-certificates.crt -logfile ~/.msmtp.log - -account shemshak -host mail.shemshak.org -# use `msmtp -a shemshak --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint -tls_fingerprint A9:B8:79:CE:47:F7:E8:EB:7B:0D:C5:3E:1E:35:72:A0:03:E3:A2:1A:A9:1C:24:34:6E:F9:9E:78:89:67:11:E3 -tls_starttls on -from amin@shemshak.org -user bandali@shemshak.org -passwordeval gpg --no-tty -q -d ~/.passwd/shemshak.gpg - -account bandali : shemshak -from bandali@shemshak.org -account aminb : shemshak -from amin@aminb.org -account bndl : shemshak -from a@bndl.org - -account gnu -host fencepost.gnu.org -# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint -tls_fingerprint 36:A7:33:D0:57:25:BB:D8:A8:21:7B:A3:91:05:A9:4F:43:4E:87:AE:65:4B:0D:A4:A0:9A:08:89:AE:1F:A5:D7 -tls_starttls on -from bandali@gnu.org -user bandali -passwordeval gpg --no-tty -q -d ~/.passwd/gnu.gpg - -account gnu-mab : gnu -from mab@gnu.org -account gnu-aminb : gnu -from aminb@gnu.org -account gnu-amin : gnu -from amin@gnu.org - -account uwaterloo -host connect.uwaterloo.ca -tls_starttls on -from abandali@uwaterloo.ca -user abandali -passwordeval gpg --no-tty -q -d ~/.passwd/uwaterloo.gpg -tls_trust_file /etc/ssl/certs/ca-certificates.crt - -account uwaterloo-friendly : uwaterloo -from bandali@uwaterloo.ca - -account csclub -host mail.csclub.uwaterloo.ca -tls_starttls on -from abandali@csclub.uwaterloo.ca -user abandali -passwordeval gpg --no-tty -q -d ~/.passwd/csclub.gpg -tls_trust_file /etc/ssl/certs/ca-certificates.crt - -account csclub-friendly : csclub -from bandali@csclub.uwaterloo.ca - -account sfl -host mail.savoirfairelinux.com -tls on -from amin.bandali@savoirfairelinux.com -user amin.bandali -passwordeval gpg --no-tty -q -d ~/.passwd/sfl.gpg -tls_trust_file /etc/ssl/certs/ca-certificates.crt - -# Set a default account -account default : shemshak -#+end_src - -** Readline -:PROPERTIES: -:header-args+: :tangle ~/.config/readline/inputrc -:END: - -#+begin_src conf -set enable-bracketed-paste on - -set colored-stats on -set colored-completion-prefix on -set completion-ignore-case on -set menu-complete-display-prefix on -set page-completions off -set show-all-if-ambiguous on -set show-all-if-unmodified on -set visible-stats on - -TAB: menu-complete -"\e[Z": menu-complete-backward - -"\e[A": history-search-backward -"\e[B": history-search-forward -#+end_src - -** rofi -:PROPERTIES: -:header-args+: :tangle ~/.config/rofi/config -:END: - -#+begin_src conf -! rofi.font: Ubuntu Mono 13 -! rofi.font: Inconsolata 16 -! rofi.font: Iosevka 13 -! rofi.font: Source Code Pro 11 -rofi.font: Source Code Pro 10.5 -rofi.modi: run,window -! rofi.width: 640 -rofi.width: 600 -!rofi.location: 2 -!rofi.yoffset: 200 -rofi.monitor: -1 -!rofi.lines: 10 - -rofi.theme: ~/.guix-profile/share/rofi/themes/gruvbox-light-hard.rasi -#+end_src - -** rofi-pass -:PROPERTIES: -:header-args+: :tangle ~/.config/rofi-pass/config -:END: - -#+begin_src conf -# permanently set alternative root dir -# root=/path/to/root - -# rofi command. Make sure to have "$@" as last argument -_rofi () { - #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@" - rofi -i -no-auto-select -kb-accept-entry "!Return" "$@" -} - -# xdotool needs the keyboard layout to be set using setxkbmap -# You can do this in your autostart scripts (e.g. xinitrc) - -# If for some reason, you cannot do this, you can set the command here. -# and set fix_layout to true -fix_layout=false - -layout_cmd () { - setxkbmap us -} - -# fields to be used -URL_field='url' -USERNAME_field='user' -AUTOTYPE_field='autotype' - -# delay to be used for :delay keyword -delay=2 - -## Programs to be used -# Editor -EDITOR='gvim -f' - -# Browser -BROWSER='chromium' - -## Misc settings - -default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl -auto_enter='false' -notify='false' -default_autotype='user :tab pass' - -# color of the help messages -# leave empty for autodetection -help_color="#4872FF" - -# Clipboard settings -# Possible options: primary, clipboard, both -clip=primary - -# Options for generating new password entries -# default_user is also used for password files that have no user field. -default_user=aminb -default_user2=bandali -password_length=30 - -# Custom Keybindings -#autotype="Alt+1" -autotype="Alt+m" -type_user="Alt+2" -type_pass="Alt+3" -open_url="Alt+4" -copy_name="Alt+u" -copy_url="Alt+l" -copy_pass="Alt+p" -show="Alt+o" -copy_entry="Alt+2" -type_entry="Alt+1" -copy_menu="Alt+c" -action_menu="Alt+a" -type_menu="Alt+t" -help="Alt+h" -switch="Alt+x" -insert_pass="Alt+n" -#+end_src - -** Screen -:PROPERTIES: -:header-args+: :tangle ~/.config/screen/screenrc -:END: - -#+begin_src screen -startup_message off -caption always "%{= kc}GNU Screen $USER@%H (load: %l)%-28=%{= .m}%D %d.%m.%Y %0c" -#+end_src - -** Shell - -*** GNU Bash -:PROPERTIES: -:header-args+: :tangle ~/.bashrc -:END: - -#+begin_src bash -# Bash initialization for interactive non-login shells and -# for remote shells (info "(bash) Bash Startup Files"). - -# Export 'SHELL' to child processes. Programs such as 'screen' -# honor it and otherwise use /bin/sh. -export SHELL - -if [[ $- != *i* ]] -then - # We are being invoked from a non-interactive shell. If this - # is an SSH session (as in "ssh host command"), source - # /etc/profile so we get PATH and other essential variables. - [[ -n "$SSH_CLIENT" ]] && source /etc/profile - - # Don't do anything else. - return -fi - -if [ -n "$IS_GUIX_SYSTEM" ]; then - # Source the system-wide file. - source /etc/bashrc -fi - -# from https://unix.stackexchange.com/a/55935 -b_prompt() { - cwd=$(sed -e "s:$HOME:~:" -e "s:\(\.\?[^/]\)[^/]*/:\1/:g" <<<$PWD) - printf $cwd -} - -if [ $(id -u) == "0" ]; then - PS1='`printf "\[\e[1;31m\]\$\[\e[00m\]"` ' -else - PS1='\$ ' -fi -PS1="\u@\h:\w/`[ -n "$GUIX_ENVIRONMENT" ] && printf \" [env]\"`\n$PS1" - -# set terminal title -PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME}: $(b_prompt)\007"' - -# i-beam cursor -# echo -e "\033[5 q" # blinking -echo -e "\033[6 q" # non-blinking - -# various bash tweaks -# append to the history file, don't overwrite it -shopt -s histappend -shopt -s cmdhist -# check the window size after each command and, if necessary, -# update the values of LINES and COLUMNS. -shopt -s checkwinsize -# If set, the pattern "**" used in a pathname expansion context will -# match all files and zero or more directories and subdirectories. -#shopt -s globstar -# for setting history length see HISTSIZE and HISTFILESIZE in bash(1) -HISTSIZE= -HISTFILESIZE= -# don't put duplicate lines or lines starting with space in the -# history. -HISTCONTROL=ignoreboth -# ignore a few very common commands and don't add them to history -HISTIGNORE='ls:l:s:g:[bf]g:history' -HISTTIMEFORMAT='%F %T ' -stty stop "" - -# aliases -alias ls='ls -p --color=auto' -alias l='ls -lh' # long format and human-readable sizes -alias ll='l -A' # long format, all files -alias dir='dir --color=auto' -alias vdir='vdir --color=auto' -alias grep='grep --color=auto' -alias fgrep='fgrep --color=auto' -alias egrep='egrep --color=auto' -alias mpv="mpv --ytdl-format mp4" -alias mv="mv -iv" -alias cp="cp -iv" -alias mbsync='mbsync -c "$XDG_CONFIG_HOME"/isync/mbsyncrc' -alias getmail='getmail --getmaildir "$XDG_CONFIG_HOME"/getmail --rcfile getmailrc' -alias m="mbsync csclub; mbsync uwaterloo; mbsync shemshak; mbsync gnub" -alias best="youtube-dl -f best" -alias e="$EDITOR" -alias se="SUDO_EDITOR=\"emacsclient\" sudo -e" - -aur() { - cd ~/usr/builds - [ -d ${1} ] || git clone https://aur.archlinux.org/${1}.git - cd ${1} -} - -function t { - cd $(mktemp -d /tmp/$1.XXXX) -} - -# separate alias definitions file, if exists -if [ -f ~/.bash_aliases ]; then - . ~/.bash_aliases -fi - -# enable programmable completion features (not needed if already -# enabled in /etc/bash.bashrc and if /etc/profile sources -# /etc/bash.bashrc). -if ! shopt -oq posix; then - if [ -f /usr/share/bash-completion/bash_completion ]; then - . /usr/share/bash-completion/bash_completion - elif [ -f /etc/bash_completion ]; then - . /etc/bash_completion - fi -fi - -# source Guix shell config dirs, for vte.sh and bash completions -GUIX_PROFILES=("${HOME}/.guix-profile" - "${HOME}/.config/guix/current") -for profile in "${GUIX_PROFILES[@]}"; do - for dir in "${profile}/etc/bash_completion.d" "${profile}/etc/profile.d"; do - if [ -d "${dir}" ]; then - for f in "${dir}"/*; do - . $f - done - fi - done -done -#+end_src - -*** profile -:PROPERTIES: -:header-args+: :tangle ~/.profile -:END: - -#+begin_src sh -# ~/.profile: executed by the command interpreter for login shells. -# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login -# exists. - -# source host-specific profile -if [ -f "$HOME/.config/profiles/$(hostname)" ]; then - . "$HOME/.config/profiles/$(hostname)" -fi - -export EDITOR="emacsclient -nw" -export VISUAL="emcl" - -PATH="$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH" -if [ -z "$IS_GUIX_SYSTEM" ]; then - PATH="$HOME/.config/guix/current/bin${PATH:+:}$PATH" - INFOPATH="$HOME/.config/guix/current/share/info${INFOPATH:+:}$INFOPATH" - export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale" -fi -export PATH -export INFOPATH - -export MY_GUIX_MANIFESTS="$HOME/.config/guix/manifest" -export MY_GUIX_PROFILES="$HOME/.config/guix/profile" - -export XDG_CONFIG_HOME="$HOME/.config" -export XDG_DATA_HOME="$HOME/.local/share" - -if [ -f "$HOME/.config/user-dirs.dirs" ]; then - set -a - . "$HOME/.config/user-dirs.dirs" - set +a -fi - -export INPUTRC="$XDG_CONFIG_HOME"/readline/inputrc -export SCREENRC="$XDG_CONFIG_HOME"/screen/screenrc - -export MAILDIR="$HOME/mail" -export CVS_RSH="ssh" - -if [ -x "$(command -v go)" ]; then - export GOPATH="$HOME/src/go" - export PATH="$GOPATH/bin:$PATH" -fi - -# if running bash -if [ -n "$BASH_VERSION" ]; then - # include .bashrc if it exists - if [ -f "$HOME/.bashrc" ]; then - . "$HOME/.bashrc" - fi -fi - -if [ -z "$IS_GUIX_SYSTEM" ]; then - # if guix is installed - if [ -x "$(command -v guix)" ]; then - SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs" - if [ -d "$SSL_CERT_DIR" -o -h "$SSL_CERT_DIR" ]; then - export SSL_CERT_DIR - export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt" - else - printf "it seems you forgot to \`guix install nss-certs\'\n" - fi - GUIX_PROFILE="$HOME/.guix-profile" - . "$GUIX_PROFILE/etc/profile" - unset XDG_DATA_DIRS - fi -fi - -for p in $MY_GUIX_PROFILES/*; do - profile=$p/$(basename "$p") - if [ -f "$profile"/etc/profile ]; then - GUIX_PROFILE="$profile" - . "$GUIX_PROFILE"/etc/profile - fi - unset profile -done - -export PATH="$HOME/usr/local/bin:$HOME/.local/bin:$PATH" - -# start an ssh-agent (with guix's openssh) -if [ -z "$IS_GUIX_SYSTEM" ]; then - if ! pgrep -u "$USER" ssh-agent > /dev/null; then - ssh-agent > ~/.ssh-agent-thing - fi - if [[ ! "$SSH_AUTH_SOCK" ]]; then - eval "$(<~/.ssh-agent-thing)" - fi -fi - -# footenote: when on a foreign distro and using Xfce, don't forget to -# disable its auto-start of gpg- and ssh-agent, by issuing -# xfconf-query -c xfce4-session -p /startup/ssh-agent/enabled -n -t bool -s false -# xfconf-query -c xfce4-session -p /startup/gpg-agent/enabled -n -t bool -s false -# see https://docs.xfce.org/xfce/xfce4-session/advanced#ssh_and_gpg_agents -# also, MATE does something similar with gnome-keyring-daemon: -# http://william.shallum.net/random-notes/disabling-gnome-keyring-daemon-ssh-agent-on-mate-desktop - -export PATH="$HOME/.cargo/bin:$PATH" -#+end_src - -*** per-host profiles - -Host-specific profiles, sourced from =~/.profile=. Each -=~/.config/profiles/HOST= file will be sourced on the machine with -=hostname= of =HOST=. - -**** chaman -:PROPERTIES: -:header-args+: :tangle ~/.config/profiles/chaman -:END: - -#+begin_src sh -export IS_GUIX_SYSTEM=true - -if [ -x "$(command -v xinput)" ]; then - xinput --set-prop "TPPS/2 IBM TrackPoint" 'libinput Accel Speed' -0.4 -fi - -setxkbmap \ - -layout us,ir \ - -option ctrl:nocaps \ - -option grp:shifts_toggle - -xmodmap -e "keysym Menu = Super_R" +This file contains some of the system-level (global) configuration +files for various programs I use. -xsetroot -cursor_name left_ptr -xset r rate 200 45 -xset b off -#+end_src - -**** darrud -:PROPERTIES: -:header-args+: :tangle ~/.config/profiles/darrud -:END: - -#+begin_src sh -export INFOPATH="$HOME/usr/local/share/info${INFOPATH:+:}$INFOPATH" -#+end_src - -**** langa -:PROPERTIES: -:header-args+: :tangle ~/.config/profiles/langa -:END: - -#+begin_src sh -export XDG_DATA_DIRS="/usr/share/mate:/usr/local/share/:/usr/share/" -#+end_src - -** redshift -:PROPERTIES: -:header-args+: :tangle ~/.config/redshift.conf :comments none -:END: - -#+begin_src conf -; Global settings for redshift -[redshift] -; Set the day and night screen temperatures (Neutral is 6500K) -;temp-day=5700 -;temp-night=3500 - -;temp-day=6500 -temp-day=6200 -;temp-night=4800 -;temp-night=5000 -;temp-night=4500 -temp-night=4000 - -; Enable/Disable a smooth transition between day and night -; 0 will cause a direct change from day to night screen temperature. -; 1 will gradually increase or decrease the screen temperature. -transition=1 - -; Set the screen brightness. Default is 1.0. -;brightness=0.9 -; It is also possible to use different settings for day and night -; since version 1.8. -;brightness-day=0.7 -;brightness-night=0.4 -; Set the screen gamma (for all colors, or each color channel -; individually) -;gamma=0.8 -;gamma=1.0 -;gamma=0.8:0.7:0.8 -; This can also be set individually for day and night since -; version 1.10. -;gamma-day=0.8:0.7:0.8 -;gamma-night=0.6 - -; Set the location-provider: 'geoclue2' or 'manual' -; type 'redshift -l list' to see possible values. -; The location provider settings are in a different section. -;location-provider=manual -location-provider=geoclue2 - -; Set the adjustment-method: 'randr', 'vidmode' -; type 'redshift -m list' to see all possible values. -; 'randr' is the preferred method, 'vidmode' is an older API. -; but works in some cases when 'randr' does not. -; The adjustment method settings are in a different section. -adjustment-method=randr - -; Configuration of the location-provider: -; type 'redshift -l PROVIDER:help' to see the settings. -; ex: 'redshift -l manual:help' -; Keep in mind that longitudes west of Greenwich (e.g. the Americas) -; are negative numbers. -;[manual] -;lat=48.1 -;lon=11.6 - -; Configuration of the adjustment-method -; type 'redshift -m METHOD:help' to see the settings. -; ex: 'redshift -m randr:help' -; In this example, randr is configured to adjust screen 1. -; Note that the numbering starts from 0, so this is actually the -; second screen. If this option is not specified, Redshift will try -; to adjust _all_ screens. -;[randr] -;screen=1 -#+end_src - -** signature -:PROPERTIES: -:header-args+: :tangle ~/.signature -:END: - -My email signature. - -#+begin_src -https://bndl.org -Free Software activist | GNU maintainer & webmaster -GPG: BE62 7373 8E61 6D6D 1B3A 08E8 A21A 0202 4881 6103 -#+end_src - -** systemd +* systemd Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]]) @@ -1683,7 +13,7 @@ Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Hav TTYVTDisallocate=no #+end_src -** TLP +* TLP *** darrud @@ -2000,632 +330,3 @@ RESTORE_DEVICE_STATE_ON_STARTUP=1 #DEVICES_TO_DISABLE_ON_UNDOCK="" #+end_src -** Tridactyl -:PROPERTIES: -:header-args+: :tangle ~/.config/tridactyl/tridactylrc -:END: - -#+begin_src conf -bind n scrollline 2 -bind p scrollline -2 - -bind 0 scrollto 0 x -bind - scrollto 100 x - -bind P tabprev -bind N tabnext - -bind d scrollpage 0.5 -bind u scrollpage -0.5 -unbind <C-d> -unbind <C-u> - -bind x tabclose -bind X undo -bind <C-S> stop - -bind gd tabduplicate -bind gw tabdetach - -bind O fillcmdline bmarks - -bind ;<Space> fillcmdline_notrail - -unbind <C-f> - -set hintfiltermode vimperator-reflow -set hintnames numeric -set urlparenttrailingslash false - -set browser abrowser -" set newtab https://bandali.eu.org - -seturl warrior.uwaterloo.ca noiframe true - -" autocmd DocStart www.reddit.com js tri.excmds.urlmodify("-t", "www", "old") -#+end_src - -** X - -*** xinit -:PROPERTIES: -:header-args+: :tangle ~/.xinitrc -:END: - -#+begin_src sh -[ -f ~/.Xresources ] && xrdb -merge ~/.Xresources -#+end_src - -*** X resources - -#+begin_src conf-xdefaults :tangle (when (eq system-type 'gnu/linux) "~/.Xresources") -#include ".Xresources.d/fonts" -#include ".Xresources.d/emacs" -#include ".Xresources.d/rxvt-unicode" -#+end_src - -**** emacs -:PROPERTIES: -:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs") -:END: - -#+begin_src conf-xdefaults -Emacs.menuBar: off -Emacs.toolBar: off -Emacs.verticalScrollBars: off -Emacs.cursorBlink: off -Emacs.FontBackend: ftcrhb,x -!Emacs.FontBackend: xft,x -! Emacs.font: Ubuntu Mono-12 -! Emacs.font: Triplicate T4C-11 -! Emacs.font: Ubuntu Mono-10.5 -! Emacs.font: Ubuntu Mono-12 -! Emacs.font: Iosevka-11 - -! Emacs.font: Fira Mono:size=15 -! Emacs.font: DejaVu Sans Mono:size=15 -! Emacs.font: Inconsolata:size=17 -! Emacs.font: Inconsolata:size=16 -! Emacs.font: Inconsolata LGC:size=14 -! Emacs.font: Source Code Pro Medium-10.5 -Emacs.font: Source Code Pro Medium:size=14 -!Emacs.font: Vazir:size=14 -! Emacs.font: Ubuntu Mono:size=16 -! Emacs.font: Iosevka:size=16 -#+end_src - -**** fonts -:PROPERTIES: -:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts") -:END: - -#+begin_src conf-xdefaults -Xft.lcdfilter: lcddefault -Xft.antialias: true -Xft.autohint: 0 -Xft.hinting: true -Xft.hintstyle: hintslight -! Xft.hintstyle: hintfull -Xft.rgba: rgb -Xft.dpi: 96 -#+end_src - -**** rxvt-unicode -:PROPERTIES: -:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode") -:END: - -#+begin_src conf-xdefaults -! Font -URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true -URxvt.boldFont: xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold -URxvt.italicFont: xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic -URxvt.bolditalicFont: xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic - -URxvt.xftAntialias: true -URxvt.letterSpace: -1 - -!URxvt.depth: 0 -!URxvt.loginShell: true -!URxvt*buffered: false -URxvt.saveLines: 100000 -URxvt.internalBorder: 3 -URxvt.lineSpace: 0 -URxvt.scrollBar: false -URxvt.scrollStyle: rxvt -URxvt*scrollTtyOutput: false -URxvt*scrollWithBuffer: true -URxvt*scrollTtyKeypress: true -URxvt.keysym.Shift-Up: command:\033]720;1\007 -URxvt.keysym.Shift-Down: command:\033]721;1\007 - -URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select -URxvt.url-select.launcher: firefox -URxvt.url-select.underline: true -URxvt.keysym.M-u: perl:url-select:select_next -URxvt.keysym.M-Escape: perl:keyboard-select:activate -URxvt.keysym.M-s: perl:keyboard-select:search -URxvt.url-launcher: /usr/bin/abrowser -URxvt.matcher.button: 1 -! URxvt.iso14755: false -! URxvt.iso14755_53: false -! URxvt.keysym.M-c: perl:clipboard:copy -! URxvt.keysym.M-v: perl:clipboard:paste -URxvt.keysym.M-c: eval:selection_to_clipboard -URxvt.keysym.M-v: eval:paste_clipboard -URxvt.keysym.C-A-V: perl:clipboard:paste_escaped -! URxvt.keysym.Shift-Control-C: eval:selection_to_clipboard -! URxvt.keysym.Shift-Control-V: eval:paste_clipboard -URxvt.keysym.C-Up: font-size:increase -URxvt.keysym.C-Down: font-size:decrease -URxvt.keysym.C-S-Up: font-size:incglobal -URxvt.keysym.C-S-Down: font-size:decglobal -URxvt.keysym.C-equal: font-size:reset -!URxvt.keysym.C-question: font-size:show - -!URxvt.iconFile: /usr/share/icons/elementary-xfce/apps/48/terminal.png - -!urxvt*foreground: white -!urxvt*background: black - -!*color0: #2E3436 -!*color1: #a40000 -!*color2: #4E9A06 -!*color3: #C4A000 -!*color4: #3465A4 -!*color5: #75507B -!*color6: #ce5c00 -!*color7: #babdb9 -!*color8: #555753 -!*color9: #EF2929 -!*color10: #8AE234 -!*color11: #FCE94F -!*color12: #729FCF -!*color13: #AD7FA8 -!*color14: #fcaf3e -!*color15: #EEEEEC - -!URxvt.foreground: #C8C8C8 -!URxvt.background: #FFFFFF - -!! black -!*color0: #2E3436 -!*color8: #555753 -!! red -!*color1: #a40000 -!*color9: #EF2929 -!! green -!*color2: #4E9A06 -!*color10: #8AE234 -!! yellow -!*color3: #C4A000 -!*color11: #FCE94F -!! blue -!*color4: #3465A4 -!*color12: #729FCF -!! purple -!*color5: #75507B -!*color13: #AD7FA8 -!! orange (replaces cyan) -!*color6: #ce5c00 -!*color14: #fcaf3e -!! white -!*color7: #babdb9 -!*color15: #EEEEEC - - -! ! Solarized -! ! Base16 Solarized Light -! ! Scheme: Ethan Schoonover (http://ethanschoonover.com/solarized) - -! #define base00 #fdf6e3 -! #define base01 #eee8d5 -! #define base02 #93a1a1 -! #define base03 #839496 -! #define base04 #657b83 -! #define base05 #586e75 -! #define base06 #073642 -! #define base07 #002b36 -! #define base08 #dc322f -! #define base09 #cb4b16 -! #define base0A #b58900 -! #define base0B #859900 -! #define base0C #2aa198 -! #define base0D #268bd2 -! #define base0E #6c71c4 -! #define base0F #d33682 - -! *foreground: base05 -! #ifdef background_opacity -! *background: [background_opacity]base00 -! #else -! *background: base00 -! #endif -! *cursorColor: base05 - -! *color0: base00 -! *color1: base08 -! *color2: base0B -! *color3: base0A -! *color4: base0D -! *color5: base0E -! *color6: base0C -! *color7: base05 - -! *color8: base03 -! *color9: base08 -! *color10: base0B -! *color11: base0A -! *color12: base0D -! *color13: base0E -! *color14: base0C -! *color15: base07 - -! ! Note: colors beyond 15 might not be loaded (e.g., xterm, urxvt), -! ! use 'shell' template to set these if necessary -! *color16: base09 -! *color17: base0F -! *color18: base01 -! *color19: base02 -! *color20: base04 -! *color21: base06 - - -! Tango colour theme for rxvt-unicode -URxvt.background: #FFFFFF -URxvt.foreground: #000000 - -! Black -URxvt.color0: #2E3436 -URxvt.color8: #757773 - -! Red -URxvt.color1: #CC0000 -URxvt.color9: #EF2929 - -! Green -URxvt.color2: #4E9A06 -URxvt.color10: #8AE234 - -! Yellow -URxvt.color3: #C4A000 -URxvt.color11: #FCE94F - -! Blue -URxvt.color4: #3465A4 -URxvt.color12: #729FCF - -! Magenta -URxvt.color5: #75507B -URxvt.color13: #AD7FA8 - -!! Cyan -!URxvt.color6: #06989A -!URxvt.color14: #34E2E2 -! orange (replaces cyan) -,,*color6: #ce5c00 -,,*color14: #fcaf3e - -! White -URxvt.color7: #D3D7CF -URxvt.color15: #EEEEEC -#+end_src - -*** ~/.xsession -:PROPERTIES: -:header-args+: :tangle ~/.xsession :tangle-mode (identity #o755) -:END: - -For custom session on Debian. See https://wiki.debian.org/Xsession. - -#+begin_src sh -if [ -f "$HOME/.xinitrc" ]; then - . "$HOME/.xinitrc" -fi - -[ -f "/usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd" ] && /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd & -[ -x "$(command -v light-locker)" ] && light-locker --lock-on-suspend & -[ -x "$(command -v pasystray)" ] && pasystray -a & -[ -x "$(command -v nm-applet)" ] && nm-applet & -[ -x "$(command -v compton)" ] && compton & -[ -x "$(command -v dunst)" ] && dunst & -[ -x "$(command -v emacs)" ] && exec ssh-agent exwm -ib 0 -#+end_src - -*** ~/.xsessionrc -:PROPERTIES: -:header-args+: :tangle ~/.xsessionrc -:END: - -#+begin_src sh -if [ -f "$HOME/.profile" ]; then . "$HOME/.profile"; fi -#+end_src - -** XDG -:PROPERTIES: -:header-args+: :tangle ~/.config/user-dirs.dirs -:END: - -#+begin_src conf -XDG_DESKTOP_DIR="$HOME/Desktop" -XDG_DOCUMENTS_DIR="$HOME/usr/doc" -XDG_DOWNLOAD_DIR="$HOME/usr/dl" -XDG_MUSIC_DIR="$HOME/usr/music" -XDG_PICTURES_DIR="$HOME/usr/pic" -XDG_PUBLICSHARE_DIR="$HOME/usr/pub" -XDG_TEMPLATES_DIR="$HOME/usr/temp" -XDG_VIDEOS_DIR="$HOME/usr/vid" -#+end_src - -** zathura -:PROPERTIES: -:header-args+: :tangle ~/.config/zathura/zathurarc -:END: - -#+begin_src conf -set smooth-scroll true -set selection-clipboard clipboard -set zoom-step 05 -set default-bg "#272727" -set statusbar-bg "#272727" -set inputbar-bg "#373737" -set window-title-basename true -set statusbar-home-tilde true - -map <Return> scroll down -map <A-Return> scroll up - -map H jumplist backward -map L jumplist forward - -map [normal] i toggle_index -map [index] i toggle_index -map [index] q toggle_index -#+end_src - -* Scripts - -This section contains various useful scripts including ones used by -the programs above. For instance, =toggle-tablet= for switching to -and from tablet mode on my X220T, =toggle-presentation-mode= for -toggling Xfce's presentation mode which keeps the screen awake, and -=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an -exact brightness value. - -** battery-percentage-time -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh" -:END: - -#+begin_src sh :tangle no -dbus_send() { - label=$1 - dbus-send --print-reply=literal --system \ - --dest=org.freedesktop.UPower \ - /org/freedesktop/UPower/devices/battery_BAT0 \ - org.freedesktop.DBus.Properties.Get \ - string:org.freedesktop.UPower.Device \ - string:"${label}" | awk '{print $3}' -} - -perc=$(dbus_send 'Percentage') -state=$(dbus_send 'State') - -if [ "$state" -eq 2 ]; then # Discharging - secs=$(dbus_send 'TimeToEmpty') -elif [ "$state" -eq 1 ]; then # Charging - secs=$(dbus_send 'TimeToFull') -fi - -printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60)) -#+end_src - -** emcl -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/emcl :shebang "#!/bin/sh" -:END: - -#+begin_src sh -exec emacsclient --alternate-editor="" -c "$@" -#+end_src - -** my-i3status -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/my-i3status :shebang "#!/usr/bin/env python2" -:END: - -#+begin_src python -# -*- coding: utf-8 -*- - -# This script is a simple wrapper which prefixes each i3status line with custom -# information. It is based on: -# https://github.com/i3/i3status/blob/master/contrib/wrapper.py -# -# In ~/.i3status.conf, add the following line: -# output_format = "i3bar" -# in the 'general' section. -# Then, in ~/.config/i3/config or ~/.config/sway/config add: -# status_command i3status | my-i3status.py -# in the 'bar' section. Make sure my-i3status.py is in $PATH. -# -# © 2012 Valentin Haenel <valentin.haenel@gmx.de> -# © 2018 Amin Bandali <bandali@gnu.org> -# -# This program is free software. It comes without any warranty, to the extent -# permitted by applicable law. You can redistribute it and/or modify it under -# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version -# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more -# details. - -import sys -import json -import os - -def get_nosleep(): - """ Return true if ~/.nosleep exists. """ - return os.path.isfile(os.path.expanduser("~/.nosleep")) - -def print_line(message): - """ Non-buffered printing to stdout. """ - sys.stdout.write(message + '\n') - sys.stdout.flush() - -def read_line(): - """ Interrupted respecting reader for stdin. """ - # try reading a line, removing any extra whitespace - try: - line = sys.stdin.readline().strip() - # i3status sends EOF, or an empty line - if not line: - sys.exit(3) - return line - # exit on ctrl-c - except KeyboardInterrupt: - sys.exit() - -if __name__ == '__main__': - # Skip the first line which contains the version header. - print_line(read_line()) - - # The second line contains the start of the infinite array. - print_line(read_line()) - - while True: - line, prefix = read_line(), '' - # ignore comma at start of lines - if line.startswith(','): - line, prefix = line[1:], ',' - - if get_nosleep(): - j = json.loads(line) - # insert information into the start of the json, but could be anywhere - j.insert(0, {'full_text' : '•', 'name' : 'nosleep'}) - # and echo back new encoded json - print_line(prefix+json.dumps(j)) - else: - print_line(prefix+line) -#+end_src - -** rofi-light -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/sh" -:END: - -#+begin_src sh -cur=$(light -G) -val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12) -[ -n "$val" ] && light -S "$val" -#+end_src - -** rofi-remmina -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/rofi-remmina :shebang "#!/usr/bin/env python2" -:END: - -#+begin_src python -import ConfigParser -import os -from subprocess import Popen, PIPE - -remmina_dir = os.path.expanduser("~/.local/share/remmina") - -fdict = dict() - -for f in os.listdir(remmina_dir): - fp = os.path.join(remmina_dir, f) - c = ConfigParser.ConfigParser() - c.read(fp) - n = c.get('remmina', 'name') - fdict[n] = fp - -lines = max(min(15, len(fdict)), 1); -width = len(max(fdict.keys(), key=len)) -rofi = Popen(["rofi", "-i", "-dmenu", \ - "-l", str(lines), "-width", str(width), \ - "-p", "connection"], stdout=PIPE, stdin=PIPE) -selected = rofi.communicate("\n" \ - .join(fdict.keys()) \ - .encode("utf-8"))[0] \ - .decode("utf-8") \ - .strip() -rofi.wait() - -r = Popen(["remmina", "-c", fdict[selected]]) -r.wait() -#+end_src - -** toggle-presentation-mode -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/sh" -:END: - -#+begin_src sh -xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T -#+end_src - -** toggle-tablet -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/sh" -:END: - -#+begin_src sh -# This script toggles between a 'normal' mode and a 'tablet' mode, doing -# a few things: - -# - rotates the screen using =xrandr=, so that rotating the physical -# display of my X220t would have the laptop's battery on the right -# hand side, -# - enables touch screen, -# - properly rotates the stylus pen and touch screen pointers, and -# - toggles between RGB and Vertical BGR sub-pixel order. - -case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in - 0) # Screen is not rotated, we should rotate it right (90°) - xrandr -o 3 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1 - xfconf-query -c xsettings -p /Xft/RGBA -s vbgr - ;; - 1) # Currently top is rotated right, we should set it normal (0°) - xrandr -o 0 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0 - xfconf-query -c xsettings -p /Xft/RGBA -s rgb - ;; - ,*) - echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2 - exit 1 - ;; -esac -#+end_src - -** volume-info -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh" -:END: - -#+begin_src sh -cur_vol=$(pamixer --get-volume) - -if [ $(pamixer --get-mute) = true ]; then - printf 'mt \n' "$cur_vol" -else - printf '%02d \n' "$cur_vol" -fi -#+end_src - -** zathura-sync -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/zathura-sync :shebang "#!/bin/sh" -:END: - -#+begin_src sh -pos="$1" -pdffile="$2" -zathura --synctex-forward "$pos" "$pdffile" || \ - ( - zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" & - sleep 1; zathura --synctex-forward "$pos" "$pdffile" ) -#+end_src |