From b78ed9da7750c396bacbc8ac14f5ec6613cea9bb Mon Sep 17 00:00:00 2001 From: Amin Bandali Date: Sat, 16 Mar 2024 11:11:30 -0400 Subject: Add default aerc config and binds --- .config/aerc/aerc.conf | 807 ++++++++++++++++++++++++++++++++++++++++++++++++ .config/aerc/binds.conf | 184 +++++++++++ 2 files changed, 991 insertions(+) create mode 100644 .config/aerc/aerc.conf create mode 100644 .config/aerc/binds.conf (limited to '.config/aerc') diff --git a/.config/aerc/aerc.conf b/.config/aerc/aerc.conf new file mode 100644 index 0000000..17b9d21 --- /dev/null +++ b/.config/aerc/aerc.conf @@ -0,0 +1,807 @@ +# +# aerc main configuration + +[general] +# +# Used as a default path for save operations if no other path is specified. +# ~ is expanded to the current user home dir. +# +#default-save-path= + +# If set to "gpg", aerc will use system gpg binary and keystore for all crypto +# operations. If set to "internal", the internal openpgp keyring will be used. +# If set to "auto", the system gpg will be preferred unless the internal +# keyring already exists, in which case the latter will be used. +# +# Default: auto +#pgp-provider=auto + +# By default, the file permissions of accounts.conf must be restrictive and +# only allow reading by the file owner (0600). Set this option to true to +# ignore this permission check. Use this with care as it may expose your +# credentials. +# +# Default: false +#unsafe-accounts-conf=false + +# Output log messages to specified file. A path starting with ~/ is expanded to +# the user home dir. When redirecting aerc's output to a file using > shell +# redirection, this setting is ignored and log messages are printed to stdout. +# +#log-file= + +# Only log messages above the specified level to log-file. Supported levels +# are: trace, debug, info, warn and error. When redirecting aerc's output to +# a file using > shell redirection, this setting is ignored and the log level +# is forced to trace. +# +# Default: info +#log-level=info + +# Set the $TERM environment variable used for the embedded terminal. +# +# Default: xterm-256color +#term=xterm-256color + +# Display OSC8 strings in the embedded terminal +# +# Default: false +#enable-osc8=false + +# Default shell command to use for :menu. This will be executed with sh -c and +# will run in an popover dialog. +# +# Any occurrence of %f will be replaced by a temporary file path where the +# command is expected to write output lines to be consumed by :menu. Otherwise, +# the lines will be read from the command's standard output. +# +# Examples: +# default-menu-cmd=fzf +# default-menu-cmd=fzf --multi +# default-menu-cmd=dmenu -l 20 +# default-menu-cmd=ranger --choosefiles=%f +# +#default-menu-cmd= + +[ui] +# +# Describes the format for each row in a mailbox view. This is a comma +# separated list of column names with an optional align and width suffix. After +# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment +# characters can be added (by default, left) followed by an optional width +# specifier. The width is either an integer representing a fixed number of +# characters, or a percentage between 1% and 99% representing a fraction of the +# terminal width. It can also be one of the '*' (auto) or '=' (fit) special +# width specifiers. Auto width columns will be equally attributed the remaining +# terminal width. Fit width columns take the width of their contents. If no +# width specifier is set, '*' is used by default. +# +# Default: flags:4,name<20%,subject,date>= +#index-columns=flags:4,name<20%,subject,date>= + +# +# Each name in index-columns must have a corresponding column-$name setting. +# All column-$name settings accept golang text/template syntax. See +# aerc-templates(7) for available template attributes and functions. +# +# Here are some examples to show the To field instead of the From field for +# an email (modifying column-name): +# +# 1. a generic one +# column-name={{ .Peer | names | join ", " }} +# 2. based upon the selected folder +# column-name={{if match .Folder "^(Gesendet|Sent)$"}}{{index (.To | names) 0}}{{else}}{{index (.From | names) 0}}{{end}} +# +# Default settings +#column-flags={{.Flags | join ""}} +#column-name={{index (.From | names) 0}} +#column-subject={{.ThreadPrefix}}{{.Subject}} +#column-date={{.DateAutoFormat .Date.Local}} + +# +# String separator inserted between columns. When the column width specifier is +# an exact number of characters, the separator is added to it (i.e. the exact +# width will be fully available for the column contents). +# +# Default: " " +#column-separator=" " + +# +# See time.Time#Format at https://godoc.org/time#Time.Format +# +# Default: 2006 Jan 02 +#timestamp-format=2006 Jan 02 + +# +# Index-only time format for messages that were received/sent today. +# If this is empty, timestamp-format is used instead. +# +# Default: 15:04 +#this-day-time-format=15:04 + +# +# Index-only time format for messages that were received/sent within the last +# 7 days. If this is empty, timestamp-format is used instead. +# +# Default: Jan 02 +#this-week-time-format=Jan 02 + +# +# Index-only time format for messages that were received/sent this year. +# If this is empty, timestamp-format is used instead. +# +#Default: Jan 02 +#this-year-time-format=Jan 02 + +# +# Overrides timestamp-format for the message view. +# +# Default: 2006 Jan 02, 15:04 GMT-0700 +#message-view-timestamp-format=2006 Jan 02, 15:04 GMT-0700 + +# +# If set, overrides timestamp-format in the message view for messages +# that were received/sent today. +# +#message-view-this-day-time-format= + +# If set, overrides timestamp-format in the message view for messages +# that were recieved/sent within the last 7 days. +# +#message-view-this-week-time-format= + +# +# If set, overrides *timestamp-format* in the message view for messages +# that were received/sent this year. +# +#message-view-this-year-time-format= + +# +# Width of the sidebar, including the border. +# +# Default: 22 +#sidebar-width=22 + +# +# Default split layout for message list tabs. The syntax is: +# +# [] +# +# is optional and defaults to horizontal. It can take one +# of the following values: h, horiz, horizontal, v, vert, vertical. +# +# is a positive integer representing the size (in terminal cells) +# of the message list window. +# +#message-list-split= + +# +# Message to display when viewing an empty folder. +# +# Default: (no messages) +#empty-message=(no messages) + +# Message to display when no folders exists or are all filtered +# +# Default: (no folders) +#empty-dirlist=(no folders) +# +# Value to set {{.Subject}} template to when subject is empty. +# +# Default: (no subject) +#empty-subject=(no subject) + +# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel +# +# Default: false +#mouse-enabled=false + +# +# Ring the bell when new messages are received +# +# Default: true +#new-message-bell=true + +# +# Template to use for Account tab titles +# +# Default: {{.Account}} +#tab-title-account={{.Account}} + +# +# Template to use for Composer tab titles +# +# Default: {{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}} +#tab-title-composer={{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}} + +# +# Template to use for Message Viewer tab titles +# +# Default: {{.Subject}} +#tab-title-viewer={{.Subject}} + + +# Marker to show before a pinned tab's name. +# +# Default: ` +#pinned-tab-marker='`' + +# Template for the left side of the directory list. +# See aerc-templates(7) for all available fields and functions. +# +# Default: {{.Folder}} +#dirlist-left={{.Folder}} + +# Template for the right side of the directory list. +# See aerc-templates(7) for all available fields and functions. +# +# Default: {{if .Unread}}{{humanReadable .Unread}}{{end}} +#dirlist-right={{if .Unread}}{{humanReadable .Unread}}{{end}} + +# Delay after which the messages are actually listed when entering a directory. +# This avoids loading messages when skipping over folders and makes the UI more +# responsive. If you do not want that, set it to 0s. +# +# Default: 200ms +#dirlist-delay=200ms + +# Display the directory list as a foldable tree that allows to collapse and +# expand the folders. +# +# Default: false +#dirlist-tree=false + +# If dirlist-tree is enabled, set level at which folders are collapsed by +# default. Set to 0 to disable. +# +# Default: 0 +#dirlist-collapse=0 + +# List of space-separated criteria to sort the messages by, see *sort* +# command in *aerc*(1) for reference. Prefixing a criterion with "-r " +# reverses that criterion. +# +# Example: "from -r date" +# +#sort= + +# Moves to next message when the current message is deleted +# +# Default: true +#next-message-on-delete=true + +# Automatically set the "seen" flag when a message is opened in the message +# viewer. +# +# Default: true +#auto-mark-read=true + +# The directories where the stylesets are stored. It takes a colon-separated +# list of directories. If this is unset or if a styleset cannot be found, the +# following paths will be used as a fallback in that order: +# +# ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets +# ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets +# /usr/local/share/aerc/stylesets +# /usr/share/aerc/stylesets +# +#stylesets-dirs= + +# Uncomment to use box-drawing characters for vertical and horizontal borders. +# +# Default: "│" and "─" +#border-char-vertical="│" +#border-char-horizontal="─" + +# Sets the styleset to use for the aerc ui elements. +# +# Default: default +#styleset-name=default + +# Activates fuzzy search in commands and their arguments: the typed string is +# searched in the command or option in any position, and need not be +# consecutive characters in the command or option. +# +# Default: false +#fuzzy-complete=false + +# How long to wait after the last input before auto-completion is triggered. +# +# Default: 250ms +#completion-delay=250ms + +# The minimum required characters to allow auto-completion to be triggered after +# completion-delay. +# +# Setting this to "manual" disables automatic completion, leaving only the +# manually triggered completion with the $complete key (see aerc-binds(5) for +# more details). +# +# Default: 1 +#completion-min-chars=1 + +# +# Global switch for completion popovers +# +# Default: true +#completion-popovers=true + +# Uncomment to use UTF-8 symbols to indicate PGP status of messages +# +# Default: ASCII +#icon-unencrypted= +#icon-encrypted=✔ +#icon-signed=✔ +#icon-signed-encrypted=✔ +#icon-unknown=✘ +#icon-invalid=⚠ + +# Reverses the order of the message list. By default, the message list is +# ordered with the newest (highest UID) message on top. Reversing the order +# will put the oldest (lowest UID) message on top. This can be useful in cases +# where the backend does not support sorting. +# +# Default: false +#reverse-msglist-order = false + +# Reverse display of the mesage threads. Default order is the the intial +# message is on the top with all the replies being displayed below. The +# reverse option will put the initial message at the bottom with the +# replies on top. +# +# Default: false +#reverse-thread-order=false + +# Sort the thread siblings according to the sort criteria for the messages. If +# sort-thread-siblings is false, the thread siblings will be sorted based on +# the message UID in ascending order. This option is only applicable for +# client-side threading with a backend that enables sorting. Note that there's +# a performance impact when sorting is activated. +# +# Default: false +#sort-thread-siblings=false + +# Set the scroll offset in number of lines from the top and bottom of the +# message list. +# +# Default: 0 +#msglist-scroll-offset = 0 + +#[ui:account=foo] +# +# Enable a threaded view of messages. If this is not supported by the backend +# (IMAP server or notmuch), threads will be built by the client. +# +# Default: false +#threading-enabled=false + +# Force client-side thread building +# +# Default: false +#force-client-threads=false + +# Show thread context enables messages which do not match the current query (or +# belong to the current mailbox) to be shown for context. These messages can be +# styled separately using "msglist_thread_context" in a styleset. This feature +# is not supported by all backends +# +# Default: false +#show-thread-context=false + +# Debounce client-side thread building +# +# Default: 50ms +#client-threads-delay=50ms + +# +# Thread prefix customization: + +# +# Customize the thread prefix appearance by selecting the arrow head. +# +# Default: ">" +#thread-prefix-tip = ">" + +# +# Customize the thread prefix appearance by selecting the arrow indentation. +# +# Default: " " +#thread-prefix-indent = " " + +# +# Customize the thread prefix appearance by selecting the vertical extension of +# the arrow. +# +# Default: "│" +#thread-prefix-stem = "│" + +# +# Customize the thread prefix appearance by selecting the horizontal extension +# of the arrow. +# +# Default: "" +#thread-prefix-limb = "" + +# +# Customize the thread prefix appearance by selecting the folded thread +# indicator. +# +# Default: "+" +#thread-prefix-folded = "+" + +# +# Customize the thread prefix appearance by selecting the unfolded thread +# indicator. +# +# Default: "" +#thread-prefix-unfolded = "" + +# +# Customize the thread prefix appearance by selecting the first child connector. +# +# Default: "" +#thread-prefix-first-child = "" + +# +# Customize the thread prefix appearance by selecting the connector used if +# the message has siblings. +# +# Default: "├─" +#thread-prefix-has-siblings = "├─" + +# +# Customize the thread prefix appearance by selecting the connector used if the +# message has no parents and no children. +# +# Default: "" +#thread-prefix-lone = "" + +# +# Customize the thread prefix appearance by selecting the connector used if the +# message has no parents and has children. +# +# Default: "" +#thread-prefix-orphan = "" + +# +# Customize the thread prefix appearance by selecting the connector for the last +# sibling. +# +# Default: "└─" +#thread-prefix-last-sibling = "└─" + +# +# Customize the reversed thread prefix appearance by selecting the connector for +# the last sibling. +# +# Default: "┌─" +#thread-prefix-last-sibling-reverse = "┌─" + +# +# Customize the reversed thread prefix appearance by selecting the first child +# connector. +# +# Default: "" +#thread-prefix-first-child-reverse = "" + +# +# Customize the reversed thread prefix appearance by selecting the connector +# used if the message has no parents and has children. +# +# Default: "" +#thread-prefix-orphan-reverse = "" + +[statusline] +# +# Describes the format for the status line. This is a comma separated list of +# column names with an optional align and width suffix. See [ui].index-columns +# for more details. To completely mute the status line except for push +# notifications, explicitly set status-columns to an empty string. +# +# Default: left<*,center:=,right>* +#status-columns=left<*,center:=,right>* + +# +# Each name in status-columns must have a corresponding column-$name setting. +# All column-$name settings accept golang text/template syntax. See +# aerc-templates(7) for available template attributes and functions. +# +# Default settings +#column-left=[{{.Account}}] {{.StatusInfo}} +#column-center={{.PendingKeys}} +#column-right={{.TrayInfo}} | {{cwd}} + +# +# String separator inserted between columns. +# See [ui].column-separator for more details. +# +#column-separator=" " + +# Specifies the separator between grouped statusline elements. +# +# Default: " | " +#separator=" | " + +# Defines the mode for displaying the status elements. +# Options: text, icon +# +# Default: text +#display-mode=text + +[viewer] +# +# Specifies the pager to use when displaying emails. Note that some filters +# may add ANSI codes to add color to rendered emails, so you may want to use a +# pager which supports ANSI codes. +# +# Default: less -Rc +#pager=less -Rc + +# +# If an email offers several versions (multipart), you can configure which +# mimetype to prefer. For example, this can be used to prefer plaintext over +# html emails. +# +# Default: text/plain,text/html +#alternatives=text/plain,text/html + +# +# Default setting to determine whether to show full headers or only parsed +# ones in message viewer. +# +# Default: false +#show-headers=false + +# +# Layout of headers when viewing a message. To display multiple headers in the +# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if +# none of their specified headers are present in the message. +# +# Default: From|To,Cc|Bcc,Date,Subject +#header-layout=From|To,Cc|Bcc,Date,Subject + +# Whether to always show the mimetype of an email, even when it is just a single part +# +# Default: false +#always-show-mime=false + +# Define the maximum height of the mimetype switcher before a scrollbar is used. +# The height of the mimetype switcher is restricted to half of the display +# height. If the provided value for the height is zero, the number of parts will +# be used as the height of the type switcher. +# +# Default: 0 +#max-mime-height = 0 + +# Parses and extracts http links when viewing a message. Links can then be +# accessed with the open-link command. +# +# Default: true +#parse-http-links=true + +[compose] +# +# Specifies the command to run the editor with. It will be shown in an embedded +# terminal, though it may also launch a graphical window if the environment +# supports it. Defaults to $EDITOR, or vi. +#editor= + +# +# When set, aerc will create and read .eml files for composing that have +# non-standard \n linebreaks. This is only relevant if the used editor does not +# support CRLF linebreaks. +# +#lf-editor=false + +# +# Default header fields to display when composing a message. To display +# multiple headers in the same row, separate them with a pipe, e.g. "To|From". +# +# Default: To|From,Subject +#header-layout=To|From,Subject + +# +# Edit headers into the text editor instead than separate fields. +# +# When this is true, address-book-cmd is not supported and address completion +# is left to the editor itself. Also, displaying multiple headers on the same +# line is not possible. +# +# Default: false +#edit-headers=false + +# +# Specifies the command to be used to tab-complete email addresses. Any +# occurrence of "%s" in the address-book-cmd will be replaced with what the +# user has typed so far. +# +# The command must output the completions to standard output, one completion +# per line. Each line must be tab-delimited, with an email address occurring as +# the first field. Only the email address field is required. The second field, +# if present, will be treated as the contact name. Additional fields are +# ignored. +# +# This parameter can also be set per account in accounts.conf. +#address-book-cmd= + +# Specifies the command to be used to select attachments. Any occurrence of +# '%s' in the file-picker-cmd will be replaced with the argument +# to :attach -m . Any occurence of '%f' will be replaced by the +# location of a temporary file, from which aerc will read the selected files. +# +# If '%f' is not present, the command must output the selected files to +# standard output, one file per line. If it is present, then aerc does not +# capture the standard output and instead reads the files from the temporary +# file which should have the same format. +#file-picker-cmd= + +# +# Allow to address yourself when replying +# +# Default: true +#reply-to-self=true + +# Warn before sending an email with an empty subject. +# +# Default: false +#empty-subject-warning=false + +# +# Warn before sending an email that matches the specified regexp but does not +# have any attachments. Leave empty to disable this feature. +# +# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The +# "(?im)" flags are set by default (case-insensitive and multi-line). +# +# Example: +# no-attachment-warning=^[^>]*attach(ed|ment) +# +#no-attachment-warning= + +# +# When set, aerc will generate "format=flowed" bodies with a content type of +# "text/plain; format=flowed" as described in RFC3676. This format is easier to +# handle for some mailing software, and generally just looks like ordinary +# text. To actually make use of this format's features, you'll need support in +# your editor. +# +#format-flowed=false + +[multipart-converters] +# +# Converters allow to generate multipart/alternative messages by converting the +# main text/plain part into any other MIME type. Only exact MIME types are +# accepted. The commands are invoked with sh -c and are expected to output +# valid UTF-8 text. +# +# Example (obviously, this requires that you write your main text/plain body +# using the markdown syntax): +#text/html=pandoc -f markdown -t html --standalone + +[filters] +# +# Filters allow you to pipe an email body through a shell command to render +# certain emails differently, e.g. highlighting them with ANSI escape codes. +# +# The commands are invoked with sh -c. The following folders are prepended to +# the system $PATH to allow referencing filters from their name only: +# +# ${XDG_CONFIG_HOME:-~/.config}/aerc/filters +# ~/.local/libexec/aerc/filters +# ${XDG_DATA_HOME:-~/.local/share}/aerc/filters +# $PREFIX/libexec/aerc/filters +# $PREFIX/share/aerc/filters +# /usr/libexec/aerc/filters +# /usr/share/aerc/filters +# +# If you want to run a program in your default $PATH which has the same name +# as a builtin filter (e.g. /usr/bin/colorize), use its absolute path. +# +# The following variables are defined in the filter command environment: +# +# AERC_MIME_TYPE the part MIME type/subtype +# AERC_FORMAT the part content type format= parameter +# AERC_FILENAME the attachment filename (if any) +# AERC_SUBJECT the message Subject header value +# AERC_FROM the message From header value +# +# The first filter which matches the email's mimetype will be used, so order +# them from most to least specific. +# +# You can also match on non-mimetypes, by prefixing with the header to match +# against (non-case-sensitive) and a comma, e.g. subject,text will match a +# subject which contains "text". Use header,~regex to match against a regex. +# +text/plain=colorize +text/calendar=calendar +message/delivery-status=colorize +message/rfc822=colorize +#text/html=pandoc -f html -t plain | colorize +#text/html=html | colorize +#text/*=bat -fP --file-name="$AERC_FILENAME" +#application/x-sh=bat -fP -l sh +#image/*=catimg -w $(tput cols) - +#subject,~Git(hub|lab)=lolcat -f +#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize + +# This special filter is only used to post-process email headers when +# [viewer].show-headers=true +# By default, headers are piped directly into the pager. +# +.headers=colorize + +[openers] +# +# Openers allow you to specify the command to use for the :open and :open-link +# actions on a per-MIME-type basis. The :open-link URL scheme is used to +# determine the MIME type as follows: x-scheme-handler/. +# +# {} is expanded as the temporary filename or URL to be opened with proper +# shell quoting. If it is not encountered in the command, the filename/URL will +# be appended to the end of the command. The command will then be executed with +# `sh -c`. +# +# Like [filters], openers support basic shell globbing. The first opener which +# matches the part's MIME type (or URL scheme handler MIME type) will be used, +# so order them from most to least specific. +# +# Examples: +# x-scheme-handler/irc=hexchat +# x-scheme-handler/http*=printf '%s' {} | wl-copy +# text/html=surf -dfgms +# text/plain=gvim {} +125 +# message/rfc822=thunderbird + +[hooks] +# +# Hooks are triggered whenever the associated event occurs. + +# +# Executed when a new email arrives in the selected folder +#mail-received=notify-send "[$AERC_ACCOUNT/$AERC_FOLDER] New mail from $AERC_FROM_NAME" "$AERC_SUBJECT" + +# +# Executed when mail is deleted from a folder +#mail-deleted=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" & + +# +# Executed when aerc adds mail to a folder +#mail-added=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" & + +# +# Executed when aerc starts +#aerc-startup=aerc :terminal calcurse && aerc :next-tab + +# +# Executed when aerc shuts down. +#aerc-shutdown= + +[templates] +# Templates are used to populate email bodies automatically. +# + +# The directories where the templates are stored. It takes a colon-separated +# list of directories. If this is unset or if a template cannot be found, the +# following paths will be used as a fallback in that order: +# +# ${XDG_CONFIG_HOME:-~/.config}/aerc/templates +# ${XDG_DATA_HOME:-~/.local/share}/aerc/templates +# /usr/local/share/aerc/templates +# /usr/share/aerc/templates +# +#template-dirs= + +# The default template to be used for new messages. +# +# default: new_message +#new-message=new_message + +# The default template to be used for quoted replies. +# +# default: quoted_reply +#quoted-reply=quoted_reply + +# The default template to be used for forward as body. +# +# default: forward_as_body +#forwards=forward_as_body diff --git a/.config/aerc/binds.conf b/.config/aerc/binds.conf new file mode 100644 index 0000000..33fc845 --- /dev/null +++ b/.config/aerc/binds.conf @@ -0,0 +1,184 @@ +# Binds are of the form = +# To use '=' in a key sequence, substitute it with "Eq": "" +# If you wish to bind #, you can wrap the key sequence in quotes: "#" = quit + = :prev-tab + = :prev-tab + = :next-tab + = :next-tab +\[t = :prev-tab +\]t = :next-tab + = :term +? = :help keys + = :prompt 'Quit?' quit + = :prompt 'Quit?' quit + = :suspend + +[messages] +q = :prompt 'Quit?' quit + +j = :next + = :next + = :next 50% + = :next 100% + = :next 100% + +k = :prev + = :prev + = :prev 50% + = :prev 100% + = :prev 100% +g = :select 0 +G = :select -1 + +J = :next-folder + = :next-folder +K = :prev-folder + = :prev-folder +H = :collapse-folder + = :collapse-folder +L = :expand-folder + = :expand-folder + +v = :mark -t + = :mark -t:next +V = :mark -v + +T = :toggle-threads +zc = :fold +zo = :unfold +za = :fold -t +zM = :fold -a +zR = :unfold -a + = :fold -t + +zz = :align center +zt = :align top +zb = :align bottom + + = :view +d = :prompt 'Really delete this message?' 'delete-message' +D = :delete +a = :archive flat +A = :unmark -a:mark -T:archive flat + +C = :compose +m = :compose + +b = :bounce + +rr = :reply -a +rq = :reply -aq +Rr = :reply +Rq = :reply -q + +c = :cf +$ = :term +! = :term +| = :pipe + +/ = :search +\ = :filter +n = :next-result +N = :prev-result + = :clear + +s = :split +S = :vsplit + +pl = :patch list +pa = :patch apply +pd = :patch drop +pb = :patch rebase +pt = :patch term +ps = :patch switch + +[messages:folder=Drafts] + = :recall + +[view] +/ = :toggle-key-passthrough/ +q = :close +O = :open +o = :open +S = :save +| = :pipe +D = :delete +A = :archive flat + + = :open-link + +f = :forward +rr = :reply -a +rq = :reply -aq +Rr = :reply +Rq = :reply -q + +H = :toggle-headers + = :prev-part + = :prev-part + = :next-part + = :next-part +J = :next + = :next +K = :prev + = :prev + +[view::passthrough] +$noinherit = true +$ex = + = :toggle-key-passthrough + +[compose] +# Keybindings used when the embedded terminal is not selected in the compose +# view +$noinherit = true +$ex = +$complete = + = :prev-field + = :prev-field + = :next-field + = :next-field + = :switch-account -p + = :switch-account -p + = :switch-account -n + = :switch-account -n + = :next-field + = :prev-field + = :prev-tab + = :prev-tab + = :next-tab + = :next-tab + +[compose::editor] +# Keybindings used when the embedded terminal is selected in the compose view +$noinherit = true +$ex = + = :prev-field + = :prev-field + = :next-field + = :next-field + = :prev-tab + = :prev-tab + = :next-tab + = :next-tab + +[compose::review] +# Keybindings used when reviewing a message to be sent +# Inline comments are used as descriptions on the review screen +y = :send # Send +n = :abort # Abort (discard message, no confirmation) +v = :preview # Preview message +p = :postpone # Postpone +q = :choose -o d discard abort -o p postpone postpone # Abort or postpone +e = :edit # Edit +a = :attach # Add attachment +d = :detach # Remove attachment + +[terminal] +$noinherit = true +$ex = + + = :prev-tab + = :next-tab + = :prev-tab + = :next-tab -- cgit v1.2.3-60-g2f50